Drone Detectors
Sort By:
In stock
In stock
In stock
Stevia FPV FLYT 250–950 / 1.2 / 3.3 / 5.8 GHz 4-band Detector Drone Hive
28 500 грн.
26 500 грн.
-7%
In stock
Stevia FPV FLYT 3-band Detector Drone Hive
22 500 грн.
In stock
Drone Detector Teneta (415-1050MHz)
9 000 грн.
In stock
Drone Detector Kolibri (100MHz to 6GHz)
18 900 грн.
In stock
In stock
Electronic Reconnaissance Device "Chuyka 2.0"
22 680 грн.
In stock
In stock
In stock
In stock
Frequency Spectrum Analyzer Svіtlyachok
18 000 грн.
In stock
In stock
In stock
In stock
Drone Detector "Kozhan" 3 Bands
19 440 грн.
In stock
VIDIK-P v4 Portable Drone Detector
26 500 грн.
In stock
In stock
In stock
In stock
UAV Detector STEP-2
16 000 грн.
In stock
"KHRUSHCH" Handheld EW Jammer (800 - 6000 MHz)
16 400 грн.
In stock
In stock
Frequently asked questions about products in this category Drone Detectors
A drone detector is a device that allows you to understand that a UAV is operating nearby. During flight, a drone constantly exchanges signals with the operator: it transmits video and receives control commands.
Drone detectors monitor video transmission signals in the radio spectrum and react when the drone analyzer detects a characteristic communication channel between the drone and the remote control.
Most drones operate in the 2.4 GHz and 5.8 GHz bands. These are the frequencies used for control commands and video signals in many FPV systems and commercial quadcopters.
A UAV detector checks these bands and detects data transmission between the drone and the operator.
A drone detector can detect most drones that use a radio channel for control. These include FPV drones, commercial quadcopters, and other UAVs with standard transmitters. Drone detectors react to the communication signal, so they can identify the operation of various drone models.
A drone detector does not identify a UAV if it is not transmitting a signal over the air. A drone analyzer only reacts to an active control or video transmission channel. If the UAV is moving autonomously without communication with the operator, there may be no signs of its operation in the spectrum.
A drone analyzer is used to detect drone signals. Drone detectors operate passively and only receive radio signals. EW jammers work differently – they create interference that can block the UAV's control channel or navigation.
A UAV detector often detects a drone's operation before it can be seen or heard. Before launch and during flight, a drone transmits control or video signals. If these transmissions fall within the reception area, the drone detector identifies their presence.
The main function of drone detectors is to scan radio frequencies and search for UAV signals. A drone analyzer detects the appearance of a control or video transmission channel. Some models also display the signal frequency or its level.
The operating range of a drone detector depends on the drone's transmitter power and terrain conditions. In open areas, drone detectors can pick up signals several kilometers away. In urban environments, the range is typically shorter due to buildings and other obstacles to radio waves.
A drone detector operates as a passive receiver and does not transmit a signal. It only listens to radio frequencies and analyzes transmissions from other devices. Due to the absence of its own emissions, a UAV detector is usually impossible to detect from the outside.
You can buy a drone detector in Ukraine on the FlashArmy military equipment marketplace. You can choose various drone detectors – from portable models to devices with advanced radio signal analysis, depending on your needs. Before choosing, you should pay attention to the operating frequencies, detection range, and capabilities of the drone analyzer to ensure the UAV detector meets your required tasks.