Product filter

Plastic Pipe Welders

Sort By:

Zenit ZPT-2000 Profi 2000W 50-300°C Plastic Pipe Welder with 20, 25, 32, 40, 50, 63mm Nozzles and Case

2 380 UAH

Tekhmann TPW-1104 Plastic Pipe Welder 220V 1100W 50-300°C nozzles 20; 25; 32mm case

1 695 UAH

Tekhmann TPW-2406 Plastic Pipe Welder 2400W 50-300°C nozzles 20 25 32 40 50 63mm 4kg

2 825 UAH

NOWA LW 900c Plastic Pipe Welder

674 UAH

Gas Soldering Iron Neo Tools 1200°C Fuel 12.6g Piezo Ignition

1 495 UAH

Neo Tools 1200W 260°C Plastic Pipe Welder, nozzles up to 110mm (not included), stand, case

6 995 UAH

Neo Tools Gas Soldering Iron 1350°C Fuel 7.8g Swivel Piezo Ignition

1 240 UAH

Gas Soldering Iron Neo Tools 1300°C Fuel 5ml Micro Torch Brass

485 UAH

Neo Tools 220V 650W 260°C Plastic Pipe Welder with 20 25 32 40mm Nozzles, Stand, Case

6 890 UAH

Neo Tools 220V 900W 260°C Plastic Pipe Welder with Nozzles up to 63mm (Not Included) Stand Case

6 190 UAH

Gas Soldering Iron Neo Tools 1300°C Fuel 20ml Piezo Ignition Nozzle 400°C

2 499 UAH

What is a pipe soldering iron?

A pipe soldering iron is a tool for joining plastic pipes and fittings through heating. It is used for polypropylene pipes in water supply systems, heating systems, and technical lines. The operating principle is simple: the parts are heated on nozzles, the plastic becomes soft, and after joining, the seam cools and holds the pipe together without threads or glue.

Purpose of a pipe soldering iron

A plastic pipe soldering iron is needed when installing a new system or replacing an old section. With the help of a soldering iron, pipes are connected to couplings, elbows, tees, valves, and adapters. For field crews working with a service vehicle, technical equipment sometimes includes power take-off units, but the pipe installation itself is carried out using handheld power tools.

Operating principle of a pipe soldering iron

The heating plate reaches the set temperature, usually around 260 °C for polypropylene. Paired nozzles for the required diameter are installed on the plate. The pipe and fitting are heated for a few seconds, removed from the nozzles, and joined without twisting. If the plastic is overheated, the passage narrows. If it is underheated, the joint may leak.

Characteristics of a pipe soldering iron

To buy a plastic pipe soldering iron, you need to consider:

Power — often 800–1500 W;
Nozzle diameters — 20, 25, 32, 40 mm for typical jobs;
Temperature — stable regulation is desirable;
Nozzle coating — Teflon is less likely to stick to plastic;
Stand — should hold the hot tool without wobbling;
Case — useful for nozzles, a wrench, and gloves.

Recommendations for choosing a pipe soldering iron

For apartment repairs, you can choose a plastic pipe soldering iron with basic 20–32 mm nozzles. For heating systems, risers, and frequent installation work, it is better to choose a more powerful pipe soldering iron with even heating, a sturdy stand, and a proper set of nozzles. If the work is carried out from a vehicle or on-site, it is also worth taking care of the tool's power supply: a request to buy a car battery in this case concerns not the pipes, but the stable operation of equipment at the work site.

Where to buy a pipe soldering iron?

When soldering pipes, it is important not just that nozzles are included in the kit, but whether they fit the required diameters and whether the tool maintains a stable temperature during operation. It is better to buy a plastic pipe soldering iron after checking the power, heating range, nozzle coating, stand convenience, and package contents. You should also not forget about additional products that may be needed — for example, fuel tanks. At Flash Army, the tool can be selected for a specific installation task: minor plumbing repairs, fitting replacement, heating system work, or a field technician's kit.

Expand

Frequently asked questions about products in this category Plastic Pipe Welders

What are pipe soldering irons?

A pipe soldering iron is a power tool for connecting plastic and polypropylene pipes with fittings. It is also called a socket fusion welding machine. The pipe and coupling are simultaneously heated on the nozzles, after which one part is inserted into the other. The plastic cools, resulting in a hermetic connection without threads, glue, or sealants.

What are plastic pipe soldering irons used for?

Soldering irons for plastic pipes are used during the installation and repair of water supply, heating, irrigation systems, and technical pipelines. They are used to install couplings, elbows, tees, valves, and transitions. Such a tool is needed both for complete pipe routing in a house and for simply replacing a damaged section when the pipe needs to be reassembled rather than temporarily clamped.

What are the main types of soldering irons for plastic pipes?

The most common soldering irons have a flat heating element, on which paired nozzles for the pipe and fitting are simultaneously placed. There are also rod models with a cylindrical heater, compact devices for small diameters, and powerful kits for pipes up to 63 mm. For home use, a set with 20, 25, and 32 mm nozzles is usually sufficient, while for regular installation, a case with a wider kit is more convenient.

What are the technical specifications of modern soldering irons for plastic pipes?

Key characteristics include power, heating temperature, nozzle diameters, heating speed, regulator type, and accessories. In entry-level models, power starts at approximately 900 W, while more powerful sets can reach up to 2400 W. Operating temperature is often adjustable within the range of 50–300 °C. It is also worth paying attention to the stand: a hot tool should not wobble on the floor or table.

What nozzles are used in soldering irons for plastic pipes?

Soldering irons use paired nozzles: one heats the pipe from the outside, the other heats the fitting from the inside. The most common diameters for household plumbing are 20, 25, and 32 mm. Larger kits include 40, 50, and 63 mm nozzles. A good coating is not for aesthetics: it prevents heated polypropylene from sticking to the metal and facilitates work after dozens of connections.

How to choose the right soldering iron for plastic pipes?

For an apartment, dacha, or minor repairs, a 900–1100 W model with 20, 25, and 32 mm nozzles is sufficient. If you need to assemble a large heating system, plumbing in a house, or frequently work with larger diameter pipes, a more powerful soldering iron with a set up to 63 mm will be useful. Do not choose a set solely for a large number of nozzles: it is more important that it includes the specific pipe diameters already incorporated into your system.

How much do plastic pipe soldering irons cost in Ukraine?

Soldering irons for plastic pipes in Ukraine cost approximately from UAH 750. For this money, you can find a basic model for infrequent work. Sets with temperature control, a case, a stand, and nozzles up to 63 mm cost more. The price is affected by power, number of nozzles, coating material, completeness of the set, brand, and whether the tool is designed for household or regular installation.

Where to buy soldering irons for plastic pipes?

When you need to replace pipes in the bathroom or assemble a new section of the water supply, it often turns out that the tool is only needed for a few days, but without it, the work simply stops. Flash Army offers compact soldering irons with nozzles 20–32 mm and more powerful kits for diameters up to 63 mm. This makes it easier to choose a kit for actual pipes and fittings, rather than overpaying for extra nozzles that will then lie in the case for years.