***7-10 days lead time for this product

The solution allows simultaneous control of UAVs and ground control stations across 3 radio bands, increasing the probability of bypassing harmful EW signals. At the same time, the ability to operate on one and two TXs is preserved.

It allows for a long wired signal line from the shelter to the antenna - up to 100 m. It enables separating video receiving antennas and control transmitting antennas to reduce interference on the video.
Compatible with multi-band control solutions for a single drone such as Triversity by Chak, MilElrs, Barvinok.

Mast mount with quick-release mechanism.

The useful signal transmission function is achieved through two main components: the first is a solution that allows transmitting the useful signal from the pilot's control panel to remote transmitters via cable without signal loss. The signal is transmitted over a twisted pair using RS485 differential digital data transmission, which prevents signal attenuation and distortion in the cable.

The second component is a board that allows physically connecting three radio transmitters to the signal line from the control panel. All three transmitters can simultaneously broadcast control panel commands over the air, but in different radio bands. The radio bands are determined by the physical characteristics of ELRS and CRSF transmitters.

*For simultaneous signal reception in several radio bands, the UAV must be physically equipped with two or three receivers for these bands.

Triversity can be used in two scenarios:

• simultaneous operation in multiple radio bands
• simultaneous use of one transmitter (TX1) directly to the UAV, and the second transmitter (TX2) via a repeater to the UAV.

Mast mount with quick-release mechanism.

Specifications