System with day camera and thermal module in a protected case — the most complete wired solution for observation in combat conditions. Day camera with 36x optical zoom and built-in thermal imaging module for effective video surveillance day and night.

Control panel in a protected case with a 16" monitor; remote thermal imager on/off and zoom control for both channels. Video, control, and power — via a single main cable (20 m twisted pair, up to 70 m); digital video output to a gadget (capture card). The system is fully wired — undetectable by SIGINT means.

Production time: 5–7 business days. Payment methods — check with the supplier.

Key Features

• 24/7 Surveillance: day camera 36x (500–700 m) + thermal imaging module.
• Control panel case 460 × 400 × 270 mm, 16" monitor, joystick, encoders.
• Angles: horizontal 360°, vertical −30°…+90°.
• Switching camera / thermal imager; zoom for both channels; thermal imager activation from the control panel.
• Digital output: PAL 720×576 @ 25 fps; NTSC 720×480 @ 30 fps.
• Power: 12 / 220 V or FPV battery up to 38 V; XT60, Type-C.
• Protection: mechanism IP67, case IP65; weight 10 kg.

Key Advantages

• Maximum Configuration: day + thermal imaging channel and protected operator post in one solution.
• Combat Conditions: no emissions; single cable to the head unit.
• Large Screen: 16" for target analysis; recording/streaming to tablet via capture card.
• Thermal Imaging Channel: human ~700–1000 m; NETD < 40 mK; zoom 1–6×.
• Azimuth: manual adjustment (no GPS).
• Autonomy: FPV battery (optional), 220 V power supply (on request).

Areas of Application

• 24/7 enemy surveillance from a concealed post.
• Combat positions: 150 cm tripod or mounting pin.
• Daytime reconnaissance 500–700 m and thermal detection 700–1000 m.
• Tasks involving video archiving on a gadget (built-in recording not provided).

Package Contents

• Pan-tilt head — 1 pc.
• 150 cm tripod or mounting pin — 1 pc.
• Day camera with optical zoom — 1 pc.
• Built-in thermal imaging module — 1 pc.
• Main cable 20 m (extendable up to 70 m).
• Protected case with built-in 16" display.
• Control panel (joystick, encoders).
• Power cable — 1 pc.
• FPV battery (optional).
• 220 V power supply unit (on request).
• Cable for connecting a video capture card.
• Bolts and mounts for thermal imager and camera.

Technical Specifications (System)

Day Module Specifications

Thermal Imaging Module Specifications

Operation Warnings

• No built-in recording — archiving via gadget and video capture card.
• For 2-axis rotation mode, a power source with a reserve of up to 37 W is required.
• Azimuth is manually adjusted (without GPS) before the mission.
• Avoid twisting the main cable when rotating 360°.
• Use in accordance with the instructions and current legislation of Ukraine.

Day + Thermal System in Case — a complete wired complex: 16", 36x zoom, 384×288 thermal, 10 kg, no emissions.

1-year warranty on factory defects.

Other products in this category can be found in the section Ground Stations and Repeaters for FPV Drones.