Kulbaba X EW Jammer System 950-1010 MHz with Kulbaba Inverter
Manufacturer: AWEDYNE. Type: EW Jammers. The Kulbaba X FPV control suppression system is designed to significantly increase the chances of preserving rolling stock from kamikaze drone attacks and to protect trenches and stationary objects. The system's frequency range is 950-1010 MHz, and it includes a Kulbaba inverter for correct operation at nominal voltage.
The device has a modular design and consists of independent blocks: each block is housed in a separate casing, equipped with its own non-removable antenna and a connector for connecting to a portable battery. Power is supplied exclusively from the included LiFePo4 24 volt 12 Ah battery; connection to the vehicle's onboard network or other external sources is not provided. The operating time from one set of batteries for two blocks is approximately 2.5 hours.
Each antenna is designed for a specific frequency and is non-removable, which prevents connecting a block without an antenna and reduces the risk of burnout of the electronic module's amplification elements. The antennas have a reinforced design to maintain their specified geometry under the influence of weather conditions and vehicle vibrations. For quick and reliable mounting on a vehicle, the block casings are equipped with rubber-coated neodymium magnets, ensuring strong attachment and protection of the carrier surface.
Key Advantages and Design Features
- Mobile and modular system for local suppression of FPV control channels within 950-1010 MHz.
- Separate block casings with their own antennas, ensuring correct operation and reduced mutual interference between elements.
- Non-removable tuned antennas and reinforced antenna elements for reliability in field conditions.
- Autonomous power from the included LiFePo4 24 volt 12 Ah battery; independent of the onboard electrical system.
- Reliable mounting on the vehicle body using rubber-coated neodymium magnets for quick installation.
Recommendations and Warnings
- 1. Many devices visually similar to "Kulbaba" have appeared. The original manufacturer of the "Kulbaba" system is AWEDYNE. Other devices are not related to this product. Be careful when choosing.
- 2. Devices with multiple bands in one casing and multiple antennas may not work correctly: antennas must be spaced apart for proper operation. Do not trust "convenient" solutions that reduce protection effectiveness.
- 3. Collinear dipole antennas form a "donut-shaped" field with a hole above the protected object – this vulnerable zone creates a risk. Use proper antenna solutions for dome protection.
- 4. Power only from the included battery. Do not modify for the vehicle's onboard network. If the operating time is too short, purchase additional battery packs.
- 5. If the device uses active cooling, it may fail due to rain, snow, or dirt, leading to overheating and device failure. It is recommended to choose solutions with passive cooling.
Kulbaba X is a mobile, modular EW jammer system that provides local suppression of FPV control channels within the 950-1010 MHz frequency range. Its design solutions (separate block casings, non-removable tuned antennas, reinforced antenna elements, rubber-coated neodymium magnets) make it suitable for deployment on military and civilian vehicles where quick installation and reliable operation in field conditions are crucial. Autonomous power via a portable LiFePo4 24 volt 12 Ah battery ensures operation independent of the onboard network.
As an official AWEDYNE brand product, the system features characteristics and design solutions aimed at durability and protection against improper use. Before purchasing, ensure the authenticity of the device and the compliance of its technical parameters with your tasks, including the 950-1010 MHz frequency range and the presence of a "Kulbaba" inverter in the system. Other products in this category here EW Jammers
Other products in this category here Vehicle EW Jammers
There are no reviews for this product, be the first to leave your review.
No questions about this product, be the first and ask your question.