BlueBird "Genera-1200" 220V Charging Station for EW
The "Genera-1200" charging station from BlueBird Tech is a 220V autonomous charging station designed to power and charge equipment, batteries, mobile devices, communication tools, and other electronics in the field. It ensures continuous operation of equipment in the absence of an external power grid, has a capacity of 1344 Wh, a power output of 700 W, and a peak power of up to 1000 W.
Functions of the "Genera-1200" Charging Station from BlueBird Tech
- Providing autonomous power to technical devices and batteries in the field.
- Power delivery via 2 x 220V AC outlets with a pure sine wave.
- Powering and charging devices via a 12V car cigarette lighter output.
- Charging mobile devices, power banks, two-way radios, and other equipment via 4 USB Quick Charge 3.0 ports.
- Charging from a 220V mains and charging from a solar panel via the XT60 input connector.
- Ensuring stable operation under high loads thanks to active cooling.
- Protection against overcharge, deep discharge, and short circuit.
Operating Principle of the "Genera-1200" Charging Station from BlueBird Tech
- The charging station stores electrical energy in a 1344 Wh LiFePO4 battery and supplies it to connected devices via 220V, 12V outputs, and USB ports.
- Thanks to the built-in BMS battery management system, MPPT controller, active cooling, and battery heating system, the station ensures stable, safe, and reliable operation in the field.
Technical Specifications
| Parameter | Characteristic |
| Battery capacity: | 1344 Wh (4 × 105 Ah) |
| Outputs: | 220 V AC |
| Output voltage: | 220 V |
| Pure sine wave: | correct waveform |
| Maximum power: | 700 W (peak 1000 W) |
| Display: | 3.2-inch LCD, impact-resistant glass |
| Battery type: | LiFePO4 |
| Cycle life: | 3500 (at +25 °C) |
| BMS: | 200 A (battery management system) |
| Metal casing: | Yes |
| Charger: | 60 A |
| Protection: | Overcharge and deep discharge protection |
| Cigarette lighter output: | 12 V (max. 10 A) |
| USB ports: | 2 × (Type-A, Type-QC) |
| USB ports: | 2 × (Type-A, Type-A) |
| XT60 input connector: | For solar charging (max. 6 A, 40-450 V) |
| Built-in MPPT controller | 60 A (40-450 V) |
| Built-in fuse: | Yes |
| Charging time from 220 V mains: | 3-4 hours |
| Operating temperature: | -20 °C to +45 °C |
There are no reviews for this product, be the first to leave your review.
No questions about this product, be the first and ask your question.