Kulbaba M (2.4) EW Jammer System with Kulbaba Inverter — AWEDYNE

The Kulbaba M (2.4) FPV Control Jamming System with inverter is a mobile and practical active electronic protection device developed by AWEDYNE. The device is designed to significantly increase the chances of preserving rolling stock from kamikaze drone attacks, as well as to protect trenches and stationary objects by locally suppressing FPV control channels.

Design and Block Architecture

The system consists of a set of independent blocks — each block has its own casing, a built-in antenna, and a connector for power supply from a portable battery. The antennas are designed for specific jamming frequencies and are not removable, which prevents the block from operating without an antenna and protects the amplifying elements of the electronics. The antenna design is reinforced to maintain geometry under weather conditions and vibration, and the mounting is done using rubber-impregnated neodymium magnets — this ensures quick and reliable fixation on metal surfaces of the vehicle.

Power Supply and Autonomy

The system is powered exclusively by the included portable LiFePo4 24 V, 12 Ah battery. The operating time from one battery is approximately 2.5 hours when operating two blocks. Important: the system does not allow connection to the vehicle's onboard network or other external sources — only from the included battery. If a longer operating time is required, it is recommended to purchase an additional battery pack.

Operational Recommendations and Warnings

• 1. Attention: devices visually resembling "Kulbaba" have appeared on the market. The original manufacturer of the "Kulbaba" system is only AWEDYNE. Other devices are not related to this product. Be careful when choosing.
• 2. Devices with multiple bands in one casing and with multiple antennas in a common casing may not work correctly; antennas must be spaced apart for correct operation. Do not succumb to the temptation of "convenient" compact solutions that reduce protection effectiveness.
• 3. Collinear dipole antennas form a "donut-shaped" field with a hole above the protected object — this is a vulnerable zone. Use correct antennas for dome coverage.
• 4. Power only from the included battery. Do not modify the power supply for the vehicle's network. If the operating time is insufficient, purchase an additional battery pack.
• 5. Avoid solutions with active cooling: fans and other active systems can fail due to rain, snow, dirt, or jamming, leading to overheating and device failure. Choose only passive cooling.

Manufacturer: AWEDYNE

Product Type: EW Jammers; Subcategory — Vehicle EW Jammers

The Kulbaba M (2.4) system with inverter is a reliable solution for mobile FPV control jamming, combining a well-thought-out antenna design, modular architecture of independent blocks with autonomous power, and simple magnetic mounting on vehicles. The system is designed for operation in field conditions with high reliability, provided that the manufacturer's recommendations regarding power supply, antenna spacing, and avoiding active cooling systems are followed.

Key technical characteristics to consider when choosing and operating: power from the included LiFePo4 24 V 12 Ah battery; estimated operating time with two blocks ~2.5 hours; non-removable frequency-specific antennas; magnetic mounting for quick installation on metal bodies and platforms.

Other products in this category here Vehicle EW Jammers