Kulbaba F 410-500 MHz EW Jammer System from AWEDYNE is a portable modular electronic warfare system designed for effective suppression of FPV drone control channels, protecting vehicles, trenches, and stationary objects. The device is developed as a set of independent blocks: each block has its own casing, an individual non-removable antenna, and a connector for power supply from the included LiFePo4 24-volt 12 Ah battery. Power is supplied exclusively from the portable battery – connection to a vehicle's onboard network or other sources is not provided. The operating time from one set of batteries is approximately 2.5 hours for a two-block configuration.
The antennas of each block are specially tuned to the 410-500 MHz operating range and have a non-removable design, which prevents operation without an antenna and reduces the risk of burnout of amplification elements in the electronic module. The antenna design is reinforced to maintain geometry during vibrations and weather exposure. For quick and reliable mounting on a vehicle, the blocks are equipped with neodymium magnets impregnated with a rubber coating, allowing easy attachment of the modules to external surfaces.
IMPORTANT!
- 1. Many devices resembling "Kulbaba" have appeared on the market. The official manufacturer of the "Kulbaba" system is only AWEDYNE. Other products may be ineffective or dangerous – be careful when choosing.
- 2. Devices with multiple bands in one casing and multiple antennas in one plane often do not work correctly: antennas must be spaced apart for proper field formation. Do not trust "convenient" single-casing options that supposedly replace the correct modular design – this reduces protection effectiveness.
- 3. Collinear dipole antennas form a field with a "hole" above the object – this is a vulnerable zone. Use only antennas that form dome-shaped protection.
- 4. Power – only from the included battery. Do not modify for vehicle power. If longer operating time is needed – purchase an additional set of LiFePo4 24V 12 Ah batteries.
- 5. Avoid devices with active cooling: they can fail due to rain, snow, or dirt, and the cooling mechanism can become blocked, leading to overheating. Choose solutions with passive cooling.
Additional illustration of the system is available at the link: Kulbaba F system photo
Key Advantages in Brief
Portability and autonomous power thanks to the included LiFePo4 24 V 12 Ah battery; modular design with separate antennas for each block; reinforced antenna for resistance to vibrations and weather effects; protection against incorrect connection due to non-removable antennas; quick magnetic mounting on the vehicle body; passive cooling for increased reliability in field conditions.
Main Characteristics of Kulbaba F EW Jammer System (410-500)
Technical Parameters
| Indicator | Value |
|---|---|
| Frequency range, MHz | 410-500 |
| Codification | Yes |
| Module power, W | 24 |
| Supply voltage, V | 24 |
| Number of modules, pcs. | 1 |
The Kulbaba F 410-500 system from AWEDYNE is designed for reliable passive protection against guided FPV sensors and kamikaze drones due to optimal frequency directionality, correct antenna design, and autonomous power from a LiFePo4 24 V 12 Ah battery. The technical parameters list key characteristics: operating range 410-500 MHz, module power 24 W, supply voltage 24 V, presence of codification, and modular design (one module in the basic configuration). The product belongs to the EW equipment category, specifically to Vehicle EW Jammers, designed for rapid deployment and reliable protection of mobile equipment units.
Other products in this category here EW Jammers
Other products in this category here Vehicle EW Jammers
There are no reviews for this product, be the first to leave your review.
No questions about this product, be the first and ask your question.
