Catalog
0
0
All about product
Description
Specification
Reviews 1
Questions0
Recommended

1 Leave a review
Product Code: 00_00000034-3
In Stock
38 400 грн.
Buy this product in 1 click:
Main specifications
Antenna type: VRX: TrueRC X2-AIR 5.8 MK II, Maple Wireless 11 dBi KIT-L; VTX: TrueRC Singularity 1280 V2; RX: TBS Crossfire Immortal T V2; Types: RHCP directional and omnidirectional antennas
Connector type: SMA / RP-SMA (antenna connectors), DC XT60 (power)
Device type: Airborne FPV Repeater for Carrier Drones (DJI Mavic 3 / 3E / 3T)
DVR availability: No
Materials: PLA HT (Heat-Resistant Plastic)
All specifications
We will deliver this product:
Payment
Description

Airborne FPV Repeater "Vishchun-M" for DJI Mavic 3 / 3E / 3T series carrier drones from BlueBird Tech — A compact, lightweight, and efficient device designed for maximally stable analog communication between the drone and the operator. Video frequencies: 1.2 GHz / 5.8 GHz. The DJI Mavic acts as the repeater's carrier. Installation takes only a few seconds – the repeater quickly attaches to the Mavic's body using two nylon ties without complex mounting or tools.

The device is powered by the Mavic's own modified battery, which connects via an additional output (such a battery is not included but is compatible with existing DJI Mavic 3 drones). This eliminates the need for separate batteries and maintains a lightweight design. Its casing is designed not to obstruct drone cooling — motors do not overheat, and ventilation systems operate without restrictions. Thanks to high-quality premium antennas, the repeater ensures long range and signal stability. Remote video channel switching is supported, which helps avoid interference and improves communication quality in challenging conditions (e.g., SHTORA jamming).

Purpose:

The repeater is designed for maximum quality transmission of control and video signals from an FPV drone to the operator — even at long distances, in areas with complex terrain, or in dense urban environments. It is especially useful in situations where direct signal transmission is difficult or when the operator works from cover, behind hills, or buildings. Thanks to the repeater, you get stable video communication and precise real-time control — without delays, interference, or signal loss.

Key Advantages:

  • Ultra-lightweight design: Minimal device weight ensures negligible load on the drone and almost no impact on motor heating.
  • Ergonomic casing design: Carefully thought-out placement of all elements and mounts is specifically optimized for installation on DJI Mavic type drones.
  • Premium reception antennas: The use of high-quality antennas with optimal radiation patterns ensures a stable signal even in challenging conditions.
  • Fast and reliable mounting: The mounting system allows the repeater to be installed on the drone in minutes without additional tools.
  • In-flight video switching: The repeater allows pre-selected video channels to be configured, between which the pilot can switch in case of "SHTORA" interference.

Technical Specifications:

Parameter Characteristic
Reception from drone
VRX 5.8GHz SKYZONE Steadyview X 5G (4,990–5,945GHz)
VRX1 Antenna 5.8GHz TrueRC X2-AIR 5.8 MK II (RHCP, RP-SMA)
VRX2 Antenna 5.8GHz Maple Wireless 11 dBi KIT-L
Receiver Sensitivity –98 dBm ± 1 dBm
Video Switching Built-in by default
TX** ERLS / TBS / Lora — not included
Transmission to operator
VTX SKYZONE 1.2
VTX Antenna TrueRC Singularity 1280 V2 (RHCP Bottom90), 1.9 dBi
RX TBS Crossfire Nano
RX Antenna TBS Crossfire Nano Immortal T V2
Mavic Mount 2 ties 5×400 mm
Reception/Transmission Range Up to 15 km (tested in combat conditions)
Power Supply
DC in* From modified Mavic battery
Power Button On repeater casing
Operating Time
From Mavic battery Confirmed: up to 20 minutes
Casing PLA HT (heat-resistant plastic)
Weight 255 g (without TX)
Dimensions
Device Dimensions 165 × 145 × 100 mm
Case 270 × 246 × 124 mm

* Power is supplied from a modified DJI Mavic battery with an XT60 connector output

** TX ERLS / TBS / Lora is optional (not included and not factored into the cost)

The FPV Repeater "Vishchun-M" includes:

No. Name Quantity Note
1 Airborne Repeater "Vishchun-M" 1
2 Antenna 5.8GHz TrueRC X2-AIR 5.8 MK II (RHCP) 1
3 Antenna 5.8GHz Maple Wireless 11 dBi KIT-L 1
4 Antenna 1.3GHz TrueRC Singularity 1280 V2 (RHCP), 1.9 dBi 1
5 45° Angle Adapter (SMA Male – SMA Female) 1
6 Case 1
7 Cable Ties 1 pack 5×400 mm
Specifications
Antenna type VRX: TrueRC X2-AIR 5.8 MK II, Maple Wireless 11 dBi KIT-L; VTX: TrueRC Singularity 1280 V2; RX: TBS Crossfire Immortal T V2; Types: RHCP directional and omnidirectional antennas
Connector type SMA / RP-SMA (antenna connectors), DC XT60 (power)
Device type Airborne FPV Repeater for Carrier Drones (DJI Mavic 3 / 3E / 3T)
DVR availability No
Materials PLA HT (Heat-Resistant Plastic)
Maximum range Up to 15 km (field/combat tests)
Module type Analog Air-Based FPV Relay Module
Monitor availability No
Operating frequency Video: 1.2 GHz / 5.8 GHz; VRX: 4.990–5.945 GHz; RX (control): 2.4 GHz (TBS Crossfire / ELRS optional)
Operating time Up to 20 min (from Mavic battery)
Power source From modified DJI Mavic 3 battery (DC in, XT60)
Reviews
Product rating
5
Reviews: 1
5
1
4
0
3
0
2
0
1
0
Саня
18 july 2025 (15:06)
Це просто нереальна штука! Ретранслятор перевершив всі мої очікування. Сигнал тримається неймовірно стабільно, зона покриття просто гігантська тепер можу літати там, де раніше навіть і думати не смів. Ніяких перешкод, лагів чи обривів, навіть у складних умовах! Підключення на раз-два, налаштування інтуїтивне. Це реально змінює правила гри для будь-якого пілота дрона. Якщо хочеш мати максимум від свого Mavic це пристрій номер один! Абсолютно кайфую від роботи, рекомендую на всі 1000%!
Is this review helpful? 0
Answers & questions

No questions about this product, be the first and ask your question.

Recommended articles