Gen2 Antenna, Repeater, EW System Control System — a wired precision antenna aiming system for FPV drones, repeaters, and EW systems. Manual adjustment on two axes (horizontal / vertical) with angle display — stable signal retention over long distances.
The system is fully wired, without data transmission modules — undetectable by electronic reconnaissance. Joystick control on the remote; control signals — via cable. The antenna is installed by the user; mounting hardware included. Suitable for field conditions and mobile stations.
Production time: 3–5 business days. Payment methods — check with the supplier.
Key Features
- 2 axes of control: horizontal (360°) and vertical (0…+86°).
- Joystick on the remote; OLED 2 × 1.5 cm — angles in degrees.
- Fully wired system — no radio modules, resistant to SIGINT.
- 30 m main cable (head ↔ remote), extension possible.
- Power 12 V or FPV battery up to 32 V; XT60, Type-C, aviation connectors.
- Mechanism IP67, remote IP65; mechanism body — aluminum.
- Connection of any type of antenna installed by the user.
Key Advantages
- Versatility: FPV antennas, repeaters, EW systems on a single aiming platform.
- High precision: manual aiming with angle indication for each axis.
- Undetectable: cable control only, no inherent RF emissions.
- Field operation: mast and antenna mounting hardware included; 60 cm pipe (adjustable).
- Communication range: stable signal retention due to precise aiming.
- Protection and materials: aluminum mechanism, IP67 / IP65.
Areas of Application
- Ground FPV stations with directional antennas over long distances.
- Repeaters and mobile communication stations.
- EW systems with directional antennas on a mast.
- Field and mobile deployments with the operator in cover.
Package Contents
- Rotary head (mechanism) — 1 pc.
- Aluminum pipe 60 cm (length adjustable as needed) — 1 pc.
- Antenna mounting hardware — 1 set.
- Head-to-mast mounting hardware — 1 set.
- Main cable (head ↔ remote) — 30 m (extendable).
- Control remote with OLED display — 1 pc.
- Power cables — 1 set.
Technical Specifications
| Parameter | Value |
| Product type | Antenna / Repeater / EW Control System |
| Model / Series | Gen2 |
| Number of control axes | 2 (horizontal and vertical) |
| Control | Joystick (vertical / horizontal) |
| Angle display | OLED 2 × 1.5 cm (in degrees) |
| Rotation angle (horizontal) | 360°; full rotation ~30 s (~12°/s) |
| Rotation angle (vertical) | 0…+86° |
| Rotary mechanism dimensions | 520 × 80 × 80 mm |
| Remote dimensions | 140 × 75 × 45 mm |
| Kit weight | 4.5 kg |
| Power supply | 12 V or FPV battery (up to 32 V) |
| Power connectors | XT60, Type-C, aviation |
| Consumption (standby, 24 V) | 13.7 W |
| Consumption (horizontal rotation, 24 V) | 16 W |
| Consumption (vertical lift with load, 24 V) | 45 W |
| Consumption (lift and rotate simultaneously, 24 V) | 49 W |
| Enclosure protection | Mechanism IP67; remote IP65 |
| Materials | Mechanism — aluminum; remote and mounts — plastic; pipe — aluminum |
| Control signal transmission | Via cable |
| Antenna connection | Any type, installed by user |
| Main cable | 30 m (extendable) |
| Production time | 3–5 business days |
Operating Warnings
- Ensure secure mounting of the head on the mast and the antenna on the mechanism before operation.
- Adhere to the power supply range of 12–32 V and XT60 polarity.
- Avoid twisting the 30 m main cable during continuous 360° rotation.
- Account for increased consumption (up to 49 W at 24 V) when both axes move simultaneously with a load.
- Use in accordance with instructions and current Ukrainian legislation.
Gen2 Control System — a wired aiming platform for antennas, repeaters, and EW: 2 axes, OLED, IP67, 30 m cable, kit weight 4.5 kg.
1-year warranty on manufacturing defects.
See other products in this category in the Ground Stations and Repeaters for FPV Drones section.
There are no reviews for this product, be the first to leave your review.
No questions about this product, be the first and ask your question.
