ЧДБ RX 150 telescopic dipole receiver antenna without mounts — a collapsible receiving dipole antenna from the Ukrainian manufacturer ЧДБ (Cherkasydronbud) for the RX onboard receiver in 150 MHz radio control systems (MIL ELRS, TX+RX 150 kits). When extended, its length is 96.5 cm — optimal for stable reception of control signals on UAVs and UGVs.
The telescopic design is convenient for transport and rapid field deployment: the antenna takes up minimal space in a case when collapsed and is ready for flight in minutes. Gain ~2 dBi, impedance 50 Ohm, bandwidth with VSWR < 1.5 — approximately 10 MHz in the 150 MHz sub-band (by analogy with the ЧДБ TX 150 telescopic antenna).
Key Features
- Type: telescopic dipole, receiving antenna for RX.
- Operating range 150 MHz (ЧДБ 150–153 MHz systems).
- Length when extended: 96.5 cm.
- Gain ~2 dBi, impedance 50 Ohm.
- Collapsible design — convenient transport and deployment.
Key Advantages
- Compact for transport: telescopic sections take up less space than a fixed 96.5 cm mast.
- Compatible with MIL ELRS 150: standard option for ЧДБ TX+RX 150 kits.
- Alternative to spiral RX: simpler installation without strict requirements for spiral polarization (vertical dipole).
- ЧДБ in-house production: compatibility with manufacturer's receivers and firmware.
- Easy installation: mounting on the frame after RX soldering — minimal preparation time.
Areas of Application
- Onboard receiver RX Mk4 150 on FPV/reconnaissance UAVs.
- ЧДБ TX+RX 150 MHz radio control kits (options with telescopic RX).
- Replacement or additional RX 150 antenna in the field.
- UGVs and platforms with a 150 MHz control channel in an EW zone.
Package Contents
- Telescopic dipole antenna RX 150.
Technical Specifications
| Parameter | Value |
| Product type | Receiving antenna (telescopic dipole) for RX |
| SKU | 912 |
| Brand | ЧДБ (Ukraine, in-house production) |
| Antenna type | Dipole, telescopic (collapsible) |
| Frequency range | 150 MHz (compatibility with enhanced 150–153 MHz range) |
| Bandwidth (VSWR < 1.5) | ~10 MHz |
| Gain | ~2 dBi |
| Polarization | Linear (recommended vertical installation on the frame) |
| Input impedance | 50 Ohm |
| Length (extended) | 96.5 cm |
| Connector | IPEX (for ЧДБ onboard RX) |
| Material | Metal (sections) |
| Package contents | Antenna |
Operating Warnings
- Extend the antenna fully to 96.5 cm before flight — partially extended sections degrade reception.
- Do not damage the telescopic sections when collapsing; avoid excessive bending.
- Install the mast vertically relative to the frame, if drone layout allows — this ensures more stable dipole operation.
- Secure the mount on the frame so that the antenna does not interfere with propellers and does not vibrate.
- Protect the IPEX connector and cable to the receiver; do not strain the feeder when rotating the camera/frame.
The ЧДБ RX 150 telescopic antenna is a practical onboard option for 150 MHz: convenient telescopic design and compatibility with the ЧДБ MIL ELRS lineup.
See other products in this category in the Military Dipole Antennas section.
There are no reviews for this product, be the first to leave your review.
No questions about this product, be the first and ask your question.