The MAMBA F405 MK2 V2 flight control stack with F55 ESC is a powerful and compact solution for FPV drones. The flight controller is equipped with an STM32F405 168MHz processor, ensuring high data processing speed and flight stability. The MAMBA F55 BLS 4IN1 ESC supports a continuous current of 55A per motor, allowing the use of powerful motors for high-performance flights. Compact size and light weight - the flight controller measures 36x18x8mm and weighs 9g, and the ESC measures 45.0x41.0x6.8mm and weighs 14g, making it convenient for installation in most popular FPV drone frame models.

Features

• Flight controller equipped with STM32F405 168MHz processor
• Modern ICM-42688-P gyroscope
• Support for various receivers CRSF/SBUS/IBUS/DSM
• Built-in BEC voltage regulators 3.3V/0.5A, 5V/2A, 9V/2A
• Reliable support for each DC 55A motor
• Dshot300/600 protocol ensures fast and accurate command transmission to the ESC

Specifications

MAMBA F405 MK2 V2 Flight Controller

• Processor: 168MHz STM32F405
• Gyroscope: ICM-42688-P
• Barometer: no
• OSD: AT7456E
• Blackbox: 16Mb flash memory
• BEC:
  • 3.3V/0.5A
  • 5V/2A
  • 9V/2A
• Receiver support: CRSF/SBUS/IBUS/DSM
• UART ports: 3
• ESC Signal: 4 Set
• LED power: yes
• LED controller: BF LED
• Buzzer: supported
• 12C: yes
• CURR: yes
• BEC protection: yes
• TVS protection: yes
• AIR UNIT port: yes
• USB: Type-C
• Firmware: BetaFlight
• BetaFlight Target: FURYF4OSD
• Size: 36x38x8mm
• Weight: 9g

MAMBA F55 BLS 4IN1 ESC 55A Speed Controller

• Input voltage: 16.8V~25.2V (3~6S Lipo)
• Continuous current: 55A*4
• Peak current: 65A (10S)
• CURR: yes
• BEC: none
• Protocol: Dshot300/600
• Firmware target: BLHeli_S CH40
• TVS protection: Yes
• Power supply: 2x8pin sh1.0/AMASS Original XT60
• Size: 45.0x41.0x6.8mm
• Weight: 14g

Mounting pattern: 30.5x30.5mm/M3

Package Contents

• 1 x MAMBA F405 MK2 V2 flight controller
• 1 x MAMBA F55 BLS 4IN1 ESC 55A speed controller

FPV Stacks Diatone