GEPRC TAKER F722 BLS 100A 8S FC+ESC Stack with 16MB Blackbox

Brand: GEPRC. Product ID: 17053. Category: Drones & Quadcopters > Stacks (FC+ESC).

The TAKER F722 8S stack with 100A ESC is a high-performance solution for large FPV drones, hexacopters, and cinematic copters. The flight controller, based on the STM32F722 processor, ensures fast data processing and stable operation under intense loads. With support for up to 8S batteries and six UART ports, the stack allows for connecting numerous peripherals, including direct connection of a DJI Air Unit without additional adapters.

Key Features

• 8S support — ideal for heavy builds and high thrust;
• STM32F722 processor — powerful MCU for precise flight control;
• ICM42688-P gyroscope — modern sensor with enhanced resistance to noise and vibrations;
• 16MB Blackbox — log storage for flight analysis and debugging;
• Integrated LC filter — reduces interference in the power circuit;
• Dual BEC: 5V @3A and 12V @3A — independent power lines for camera, VTX, and other modules;
• Support for up to 8 motors — allows connection without additional splitters;
• 100A (105A peak) ESC with dual-channel MOSFET design — stable control of heavy loads;
• Quick installation — thoughtful wiring, damping pads, and convenient mounting mechanics;
• Direct DJI Air Unit connection — simplifies video transmission system integration.

Suitable for which drones

• Large 7–10-inch FPV drones with high thrust;
• Cinematic copters (e.g., with O3/O4 system and hybrid mounts);
• Hexacopters and octocopters;
• Drones for high-speed FPV filming and professional applications.

Technical Advantages

The combination of a powerful controller and a 100A ESC allows for the use of large, quiet motors without loss of control. The 16MB Blackbox enables detailed analysis of flight logs, which is especially important for PID tuning and diagnostics. The integrated LC filter and two BEC lines provide stable power for critical components such as the camera and video transmitter. The 105A peak ESC current ensures power reserve during sudden accelerations and maneuvers.

Package Contents

• 1 × TAKER F722 8S Flight Controller
• 1 × TAKER H100 100A 4-in-1 ESC
• 1 × Capacitor
• 1 × DJI O3 Connection Cable
• 2 × FC Adapter Cables
• 1 × SH1.0 4pin Cable
• 1 × Camera Connection Cable
• 1 × VTX Cable
• 1 × XT90 Power Cable
• 4 × M3*30 Screws
• 4 × M3*25 Screws
• 8 × Plastic Nuts
• 12 × Damping Pads

This stack will be a reliable choice for pilots seeking a balance between power and reliability for heavy drones. The GEPRC TAKER F722 BLS 100A 8S is suitable for both professional projects and enthusiasts building high-performance custom copters.

Other products in this category can be found here Stacks (FC+ESC)

FPV Stacks GEPRC