Impact-resistant Armolan Safety 8mil (200µm) armored film, 1.83m width, length: cut to size, protective for windows and doors (1 sq.m./0.55 lin.m.)

Explosion-proof film for windows Safety 8mil (200μm) is an ideal solution for those who want to protect their home or office from window damage. This one armored film significantly increases the strength of windows, protects them from impacts and fragments, and also increases the level of security inside the premises.

The film has a thickness of 8mil (200 μm) and a width of 1.83 m, which allows it to be easily installed on windows of different sizes. It is made of high-quality materials that ensure its durability and resistance to mechanical influences, including shock wave.

you can buy armored film on windows for reliable protection. Installation of the film is quick and easy, thanks to a special molecular adhesive base, which is activated by an aqueous solution and ensures strong adhesion to the surface. Besides, protective film leaves no traces of glue after removal.

Protective film Safety 8mil ideal for home, workplace and outdoor use. It is designed to protect windows from impacts, scratches, dirt and other damages. Due to its strength and durability, this shockproof film will become a reliable companion in any conditions.

If you want to protect your home or office from window damage, then you should buy armored film on the windows Impact-resistant film for windows protective Safety 8mil (200μm) is a great solution. It is easy to install, reliable and protects windows from mechanical damage, including blast wave. This film will serve you for a long time and reliably, providing maximum protection of your property and safety inside the room.

The width is 1.83 m, any number of linear meters can be cut!

Safety 8mil (1.83 m), glued on 4 mm glass, received a certificate of protection class СЗУ-01.2.

This certificate is issued for finished glass products - film 8 mil (200μm) + glass 4М0. The certificates confirm that the products "Safe multi-layered glass brand СЗУ-01.2" correspond to the protection class CM 1 DSTU B.V 2.7-123-2004.

The main advantages of protective films:

• Protection against various damages: explosions, burglaries, natural disasters.
• Fragility. When the glass is broken, the fragments do not fly away, but remain on the adhesive layer of the film.
• Durability. The term of operation is not less than 7 years
• Energy saving. Protective films create the ability of the surface to absorb heat and reflect it
• Fade protection. Reduces the impact of UV rays on the surface
• Ease of use. Window protective films can be easily washed and cleaned without any damage to them.

Installation guide for sun-protective and impact-resistant film

You will need:

• Utility knife (very sharp)

• Scraper — for cleaning glass

• Water sprayer

• Squeegee or a plastic card wrapped in a thin cloth

• Soap solution (optional): 5 drops of liquid soap or shampoo per 1 liter of water

Installation steps:

Step 1: Film preparation

• Measure the glass dimensions.

• Cut the film with a 2–3 cm margin at the edges.

Step 2: Glass preparation

• Wash the glass thoroughly with a cleaning agent.

• Remove dust, dirt, stains, and grease with a scraper.

• Then generously wet the glass with clean water from a sprayer (or soap solution for easier film sliding).

Step 3: Film preparation

• Remove the protective layer from the film.

• Wet the adhesive side of the film with water or soap solution.

Step 4: Application

• Apply the film (wet adhesive side) to the wet glass.

• Wet the outer face of the film with water to avoid scratches while smoothing.

Step 5: Smoothing

• With a squeegee or a card wrapped in cloth, squeegee out air and water from under the film.

• Move from the center to the edges, working only on a wet surface.

Step 6: Trimming

• After smoothing, carefully trim excess film with a sharp utility knife along the glass edge.

⚠️ Important tips:

• Work in the shade or in a cool room — direct sunlight makes installation harder.

• Keep the film wet during all steps — this prevents scratches.

• The film can be removed and repositioned while it is still wet.

Specifications

Armolan, impact-resistant armored, impact-resistant armored for windows, impact-resistant armored film, impact-resistant armored safety, impact-resistant armored width, Impact-resistant, cut-to-size