Impact-resistant armored Armolan Safety 4mil (100µm), width 1.52m, length: cut-to-size protective film for windows and doors (1 sq.m./0.66 linear m.)

Buy an armored film against an explosion on the windows Safety 4mil is a roll colorless armored film 115 μm thick, intended for installation on the surface of architectural glass. This one impact resistant film strengthens glazing and prevents spalling fragments glass when hit by flying objects (ball, stone, etc.). Shards of glass are kept on the surface of the film, and the glass itself remains in the frame. The films have a special protective layer that protects against scratches and other unwanted damage that may occur during window washing. you can buy armored film on windows for maximum protection.

Self-adhesive impact resistant film Safety 4mil (1.524) is a multilayer structure. It is part of this anti-vandal film includes a highly effective molecular adhesive that is activated by an aqueous solution. Armor film shock-resistant, which makes it an ideal solution for protecting windows from shock wave and others mechanical damage.

Width 1,524 m., any number of linear meters can be cut!

It is necessary to buy an armored film for windows, the use of protective films is advisable in all cases when the glass must have additional strength: glazing of residential and administrative buildings, shops, schools, kindergartens, shop windows, sports facilities, as well as glass roofs, ceilings, visors, canopies, etc. a layer of glass due to a special coating, reliably absorbing even strong impacts. The film serves as a reliable additional protection against thieves. The great mechanical strength of the films combined with their elasticity and high shear resistance makes it almost completely impossible for a person to penetrate through the glass protected by the film. If someone tries to break into the apartment, the anti-vandal film will delay him for a long time - during this time, the alarm usually goes off and the patrol of the security company has time to arrive.

Safety 4mil (1.524), glued on 4mm glass, received a certificate of protection class СЗУ-01. This certificate is issued for finished glass products - film 4 mil (100 μm) + glass 4М0. The certificate confirms that the product "Multilayer safety glass of brand СЗУ-01" corresponds to the protection class SM1 of DSTU B.V. 2.7-123-2004.

The main advantages of protective films:

• Protection against various damages: explosions, burglaries, natural disasters.
• Fragility. When the glass is broken, the fragments do not fly away, but remain on the adhesive layer of the film.
• Durability. The term of operation is not less than 7 years
• Energy saving. Protective films create the ability of the surface to absorb heat and reflect it
• Fade protection. Reduces the impact of UV rays on the surface
• Ease of use. Window protective films can be easily washed and cleaned without any damage to them.

Installation guide for sun-protective and impact-resistant film

You will need:

• Utility knife (very sharp)

• Scraper — for cleaning glass

• Water sprayer

• Squeegee or a plastic card wrapped in a thin cloth

• Soap solution (optional): 5 drops of liquid soap or shampoo per 1 liter of water

Installation steps:

Step 1: Film preparation

• Measure the glass dimensions.

• Cut the film with a 2–3 cm margin at the edges.

Step 2: Glass preparation

• Wash the glass thoroughly with a cleaning agent.

• Remove dust, dirt, stains, and grease with a scraper.

• Then generously wet the glass with clean water from a sprayer (or soap solution for easier film sliding).

Step 3: Film preparation

• Remove the protective layer from the film.

• Wet the adhesive side of the film with water or soap solution.

Step 4: Application

• Apply the film (wet adhesive side) to the wet glass.

• Wet the outer face of the film with water to avoid scratches while smoothing.

Step 5: Smoothing

• With a squeegee or a card wrapped in cloth, squeegee out air and water from under the film.

• Move from the center to the edges, working only on a wet surface.

Step 6: Trimming

• After smoothing, carefully trim excess film with a sharp utility knife along the glass edge.

⚠️ Important tips:

• Work in the shade or in a cool room — direct sunlight makes installation harder.

• Keep the film wet during all steps — this prevents scratches.

• The film can be removed and repositioned while it is still wet.

Specifications

Armolan, impact-resistant armored, impact-resistant armored for windows, impact-resistant armored armolan, impact-resistant armored safety, impact-resistant armored width, Impact-resistant, cut-to-size