4Hawks Raptor SR Directional Antenna for Autel Evo II V2 Drones
The 4Hawks antenna for the Autel Evo II v2 model operates in two bands (2.4+5.8 GHz) with a gain of 9 dBi. The antenna's design concept was to make it look like an integral part of the drone by default.
Antenna installation requires permanent modifications to the remote controller. The entire kit is lightweight and uniform (without any loose parts).
Changing the antenna's direction should not be difficult, as the system is designed to allow quick position changes with a single "click." This ensures you won't lose connection with the drone.
Important: Antenna installation requires physical modification of the remote controller. Installation video guide: https://www.youtube.com/watch?v=dfP3Womip94
Features
- Increased flight range
- Elimination of interference from other devices
- Improved video signal
- Adjustable signal direction
- High-quality lightweight construction
- Ready-to-use solution
INCREASE DRONE FLIGHT RANGE
Raptor antennas were designed to extend your drone's flight range, making flying even more exciting than ever before. All this with crystal-clear video and a very long range, limited only by your battery.
BREAK PERFORMANCE BARRIERS
The directional antenna ensures continuous drone flight without any interference or noise from other devices or networks.
EXCEPTIONAL ANTENNA BEAM PERFORMANCE
Compared to conventional omnidirectional antennas with low efficiency at a distance, the 4Hawks Raptor patch antenna expands sectoral coverage, increasing maximum flight range.
OPTIMIZED WAVE PROPAGATION
The signal is amplified due to efficient wave propagation directed towards the drone.
ANTENNA TILT ADJUSTMENT
Each mounting system can perfectly adjust the elevation angle and direct the antenna to the drone's current position.
Specifications
Electronic Parameters
| Frequency | Port 1: 2.40 - 2.50 GHz & 5.00 - 5.80 GHz Port 2: 2.40 - 2.50 GHz & 5.00 - 5.80 GHz |
| Gain | Port 1: 8 dBi (+/- 1 dBi) Port 2: 8 dBi (+/- 1 dBi) |
| VSWR | Port 1: < 1.50 (max. < 2.15) Port 2: < 1.50 (max. < 2.15) |
| Beamwidth | Port 1: 90°/65° Port 2: 90°/65° |
| Polarization | Port 1: Vertical Port 2: Vertical |
| Impedance | Port 1: 50 Ω Port 2: 50 Ω |
Mechanical Parameters
| Material | Antenna: Samsung ABS plastic, polyurethane, aluminum, stainless steel, nylon, PTFE PCB Mount: stainless steel + paint |
| Weight | ~ 180 g (110 g Antenna + 70 g mount) |
| Dimensions | 16.1 x 9.1 x 1.7 cm |
| Connection | Port 1: RP-SMA female Port 2: RP-SMA female |
| Tilt | 3 tilt levels, OnClick system |
| Mounting Type | SMA connectors (permanent) |
Package Contents
- Directional antenna
- 2x UFL antenna cable (long and short)
- Steel mounts
- 2x RP-SMA RG316 male connectors
Graphs
VSWR, port isolation, and characteristic pattern of Raptor antennas
There are no reviews for this product, be the first to leave your review.
No questions about this product, be the first and ask your question.
