Happymodel HC700R 16x Zoom Analog Camera

The Happymodel HC700R Zoom Camera features 16x autofocus zoom for shooting at various distances. It supports 1080p video recording at 25 frames per second. Remote control allows changing zoom and starting or stopping recording. AV output provides analog signal transmission to external devices. The built-in SD card slot supports cards up to 64GB. Power is supplied from a 12V source, and dimensions are 51x62x100mm.

Features

• Digital variable camera with 16x autofocus
• High-definition recording - 1080p25fps
• Remote control for zooming and starting/stopping recording
• AV signal output for transmitting signals via analog images
• Built-in SD card slot, supports SD cards up to 64G

Specifications

• Video recording: 1080p25fps
• Zoom: 16x
• SD card support: up to 64G
• Power source: 12V
• Dimensions: 51x62x100
• Weight: 197g

Package Contents

• 1 x Happymodel HC700R Zoom 16x camera
• 1 x JST 6Pin cable
• 1 x bolt

Pinout definition:

• Blue: PWM zoom, for zoom control signal
• Green: PWM record input, for video function switching
• Yellow: AV output for video signal output
• Black: GND, for video ground
• Red: vcc12v in, for 12V input power, positive wire
• Black: GND, for negative input power wire

Wiring method:

• The blue wire connects to the receiver's PWM port, which requires an external 5V power supply. The power wire must be connected to the negative port of the camera's input power wire, otherwise it will not be controlled if they do not share a common ground.
• The camera's yellow and black wires must be on a common ground with the FPV transmitter to prevent a no-signal situation.
• The 12V power input for the camera can use a 12V BEC module.

Instructions:

• It takes about 20 seconds for the camera to start. When the image appears, DO NOT press the record button for a few seconds until the camera's internal background operations complete preparation.
• After recording is complete, wait 5 seconds to start a new recording or power off. It takes time to save the previous video; powering off too quickly or starting a new recording too fast may cause the previous video to fail to save.
• To extract video from the SD card, use the "Diskplayer" software released by the manufacturer. When inserting the SD card, you may be prompted to format it; please do not format. Simply open the software and find the video document in "idea 1", copy the video, change the file format to "AVI", and save it. Then you can watch the video with any player.

Example setup of Happymodel HC700R Zoom 16x camera

Useful links

• Diskplayer program download for Happymodel HC700R Zoom 16x

Happymodel Drone Cameras, Drone Cameras 51–80°, 1/2.8-inch, 4:3