GALYCHYNA F405 V3 8S/60A Quadcopter Flight Stack from the 603700 FPV brand — a ready-made solution for 10" FPV drones. The kit includes the GALYCHYNA F405 V3 8S flight controller and the FRANKIVSK v3 8S/60A electronic speed controller, allowing for quick assembly of a powerful and reliable aircraft for aggressive FPV flight or payload applications.

Kit Description and Key Advantages

This flight stack is designed for 10" frames and comes almost ready to fly: the controller is pre-configured for a popular 10" build, allowing for most cases to take off practically out of the box. Support for up to six motors enables the construction of a hexacopter for increased payload capacity by adding two additional ESCs to the arms. The kit is ideal for both aggressive FPV piloting and creating a cargo drone with enhanced payload capacity.

Power and BEC

The board features two BECs: 5V 3A and a universal 5V/9V/12V 3A. The voltage selection for the second BEC is done via a jumper that needs to be soldered on the board. This configuration provides power for powerful servos and third-party devices; in kamikaze mode, the second BEC can power the drone's re-targeting board.

Ports, Outputs, and Expansion

The controller has three servo outputs — one next to the camera for convenient connection of a camera tilt mechanism, and two more — for controlling an initiator or other servos. There are 6 UARTs for connecting a receiver, GPS, and additional telemetry modules or sensors. Two controllable PINIO outputs with 5V/1A switching allow for external load control. Video channel control enables switching video channels during flight, preventing cross-signal jamming by other pilots. The "hide takeoff point" function provides OSD overlay almost across the entire screen, making it difficult to determine position when intercepting the video signal.

Firmware and Performance

The ESC comes with Bluejay firmware installed, which provides improved motor behavior thanks to Bi-directional DShot support and RPM filtering for smoother control. Bluejay also allows for customizing motor startup melodies. The controller is compatible with Betaflight, INAV, Ardupilot, and Milbeta firmwares, offering flexibility in software selection for various tasks.

Technical Specifications of GALYCHYNA F405 V3 8S Flight Controller

• Microcontroller STM32F405RGT6
• Gyroscope/Accelerometer ICM42688P
• Firmware Betaflight, INAV, Ardupilot, Milbeta
• OSD AT7456
• Barometer DPS310
• Blackbox MicroSD slot
• Power Supply 3-8S
• Interfaces 6*UART, I2C, 2*ADC (VBAT, Current), SBus with built-in inverter on R5, buzzer output
• ESC Outputs 6 pcs (M1-M6, PWM, DSHOT)
• Servo Outputs 3 pcs (S1, S2, S3)
• BEC 2 pcs: 5V 3A and 5V/9V/12V 3A (voltage selection via jumper on board)
• PINIO 2 pcs, output voltage 5V 1A
• Dimensions 38x38 mm
• Mounting Holes 30.5x30.5 mm, M3

Technical Specifications of FRANKIVSK v3 8S/60A ESC

• Power Supply 3-8S LiIon/LiPo
• Current 60 A nominal, 70 A burst
• Current Sensor Yes, up to 132 A
• Firmware Bluejay
• Operating Protocols DSHOT300/600
• Connection Connector JST-SH 8 pin
• Power Connector XT-60
• Dimensions 45x45 mm
• Mounting Holes 30.5x30.5 mm, M3

This kit is suitable for users looking for a reliable and functional flight stack with extended connectivity options and high power for a 10" frame. Thanks to support for six motors and two BEC channels, you get the flexibility to build both an aggressive FPV quadcopter and a cargo drone with increased payload capacity. Recommended for pilots who value quick and simple assembly with the possibility of future upgrades.

Brand: 603700 FPV. Product category: Drones & Quadcopters > Drone Components > Drone Parts > Stacks (FC+ESC).

Other products in this category here Stacks (FC+ESC)

FPV Stacks 603700 FPV