The SpeedyBee F405 V5 OX32 55A Stack combines a modern flight controller (FC) and a reliable electronic speed controller (ESC). The ESC is capable of handling 55A per channel with a peak current reserve up to 70A. The controller is built on an STM32F405 processor with an ICM42688P gyroscope, providing precise stabilization and quick response in flight. For settings, Bluetooth is provided, as well as log recording to 16MB Blackbox memory. Protection in the form of a TVS diode and a 1000uF capacitor reduces the risks from voltage spikes, increasing system stability during flight.

Features

• Equipped with a powerful STM32F405 processor and ICM42688P gyroscope, ensuring precise motion tracking and flight stability
• Bluetooth support for cable-free settings, and 16MB Blackbox memory for flight log analysis
• Compatibility with BetaFlight, INAV, and Ardupilot makes the controller versatile for various flight scenarios
• The OX32 55A speed controller can handle continuous current up to 55A per channel with peak loads up to 70A, suitable for powerful FPV drones
• Built-in protection in the form of a TVS diode and an external 1000uF capacitor reduce the risk of damage from voltage fluctuations, increasing system reliability

Specifications

SpeedyBee F405 V5 30x30 Flight Controller

• Processor: STM32F405
• IMU Gyroscope: ICM42688P
• Barometer: SPA06-003
• OSD Chip: AT7456E
• Bluetooth: Supported
• WiFi: Not supported
• DJI Air Unit connection method: Two methods supported: 6-pin connector or direct soldering
• Blackbox: 16MB
• Current sensor input: Supported (for SpeedyBee BLS 60A ESC scale = 400 and offset = 0)
• Input power: 3S-6S Lipo
• BEC 1: 5V/1.5A - 9 groups: 4x+5V; 1xBZ+; 4x+5V
• BEC 1: 9V/3A - 2 groups: 1x9V; 1x9V
• Output: 3.3V; 4.5V
• ESC Signal: M1-M4 and 10-pin connector
• Servo Signal: S5-S6
• UART ports: 6
• Port: USB Type-C
• ESC Telemetry: UART R5
• I2C: Supported
• Traditional Betaflight LED panels: Supported
• Meteor LED Strip pads: Supported
• BOOT button: Supported
• RSSI input: Supported
• Smart Port: Not supported
• Supported flight controller firmware: BetaFlight 4.5.2 (default), INAV, Ardupilot
• Firmware target name: SPEEDYBEEF405V5
• Mounting: 30.5*30.5mm (hole diameter 4mm)
• Size: 39*39*4.5mm
• Weight: 8.1g

SpeedyBee OX32 55A 30x30 4-in-1 ESC

• Input power: 3-6S LiPo
• Firmware: OX32
• Continuous current: 55A/220A*4
• Peak current: 70A/280A*4
• External capacitor: 1000uF Solid Capacitor (included)
• Protocol: ESC DSHOT300/600
• TVS protection diode: Yes
• Output power: VBAT
• Current sensor: Supported
• ESC Telemetry: Supported
• Mounting: 30.5*30.5mm (hole diameter 4mm)
• Size: 40.9*44.9*8mm
• Weight: 19.1g

Package Contents

• 1 x SpeedyBee F405 V5 Flight Controller
• 1 x SpeedyBee OX32 55A 4-in-1 ESC
• 1 x 35V 1000uF Capacitor
• 5 x M3 Nylon Nuts
• 5 x M3 Silicone O-rings
• 5 x Silicone Gasket for FC
• 5 x Silicone Gasket for ESC
• 1 x 10-pin SH 1.0mm Cable 25mm long (for FC-ESC connection)
• 1 x 10-pin SH 1.0mm Cable 75mm long (for FC-ESC connection)
• 1 x 6-pin SH 1.0mm Cable 80mm (for DJI module connection)
• 1 x 6-pin GPS SH 1.0mm*1 Cable 120mm long
• 1 x 4-pin GPS SH 1.0mm*1 Cable 120mm long
• 1 x 4-pin SH 1.0mm*1 Cable 100mm long (for receiver connection)
• 1 x XT60 Power Cable 120mm
• 4 x M3*4 30mm Hex Socket Screws
• 2 x Heat Shrink Tubes for Capacitor
• 1 x User Manual

FPV Stacks SpeedyBee