4Hawks Raptor SR Directional Antenna for DJI Mavic 3 Drones

Designed for DJI Mavic 3

The 4Hawks antenna for the DJI Mavic model is very advanced, operating on both 2.4 GHz and 5 GHz frequencies. The antenna's design concept was to make it look like an integral part of the drone by default. The entire structure is 100% UV protected, ensuring equipment durability. Additionally, part of the structure is made of aluminum to make the entire assembly as lightweight as possible. The whole kit is light and uniform (without any loose parts of the equipment). Changing the antenna's direction should not be difficult, as the system is designed to allow quick position changes with a single "click." This way, you can be sure you won't lose connection with the drone.

Important: physical modification of the remote controller is required for antenna installation. Video installation guide: quot;0" width="465"> Frequency Port 1:   2.40 - 2.50 GHz & 5.00 - 5.80 GHz
Port 2:   2.40 - 2.50 GHz & 5.00 - 5.80 GHz Gain Port 1:   8 dBi  (+/- 1 dBi) & 10 dBi  (+/- 1 dBi)
Port 2:   8 dBi  (+/- 1 dBi) & 10 dBi  (+/- 1 dBi) VSWR Port 1:   < 1.50  (max. < 2.15)
Port 2:   < 1.50  (max. < 2.15) Beamwidth Port 1:   90°/65° & 55°/55°
Port 2:   90°/65° & 55°/55° Polarization Port 1:   Vertical
Port 2:   Vertical Impedance Port 1:   50 Ω
Port 2:   50 Ω

Mechanical Parameters

Package Contents

Accessories included with the Raptor antenna kit:

1. Directional antenna amplifier
2. 3D-printed top panel of the antenna module with SMA expansion ports
3. Stainless steel mounting kit
4. 4.2x screwdriver (Torx T6 and Philips) + 8mm wrench
5. Two low-reflection connecting cables
6. Additional tools for Mavic

Graphs

VSWR, port isolation, and characteristic pattern of Raptor antennas