Flywoo X30 PCBA Waterproof Invisible Spray for Moisture and Splash Protection
Brand: FLYWOO. Flywoo X30 PCBA is a specialized water-repellent spray for reliable protection of drone electronics and other small printed circuit boards from moisture, splashes, and corrosion. The product creates a transparent protective coating that is virtually invisible during device operation, preserving heat exchange and electrical characteristics of the boards.
Description and Advantages
Flywoo X30 is a superhydrophobic aerosol that repels water similar to the natural effect on plant leaves. After spraying, a thin invisible layer forms, reducing the risk of short circuits, preventing malfunctions due to condensation, slowing down corrosive processes, and preventing mold growth. The spray is easy to apply, dries quickly (approximately 2–3 minutes for a working layer), and provides stable daily protection even in challenging weather conditions.
Scope of Application
- Protective coating against moisture and splashes for flight controllers, ESCs, video transmitters, and other boards.
- Effective optics protection: lens coating reduces water droplet adhesion (transparency reduction of approximately ~30%, but the coating can be easily removed if necessary).
- Protective coating for board connectors and battery contacts.
- Suitable for a wide range of drone components requiring comprehensive protection against moisture, dust, and salt fog.
Instructions for Use
- 1. Cleaning: Before application, thoroughly remove dust and grease from the surface of the board or component.
- 2. Application and re-coating: The spray is suitable for re-application; if necessary, clean the surface and apply an additional layer.
- 3. Recommendations before application: Shake the can to ensure liquid homogeneity.
- 4. Sequence and drying: Allow each layer to dry completely before applying the next; for optimal effect, 2–3 layers are recommended.
- 5. Drying time: After spraying, the surface dries in approximately 2–3 minutes and is ready for daily use.
- 6. Precautions: Do not allow prolonged immersion of the powered PCB in water; for thorough cleaning, use specialized board cleaning solutions.
Technical Specifications
| Parameter | Value |
|---|---|
| Capacity | 56.7 g (e.g., Flywoo GOKU F722 PRO Mini V2 20x20 flight controller requires ~2.5 g for double-sided spraying 3 times) |
| Color | Milky white |
| Relative density (g/cm³, 25°C) | 1.56 ± 0.3 |
| Water repellency angle | >160° |
| Material | Superhydrophobic material |
| Purpose | Water protection, short-circuit prevention, corrosion protection, salt fog protection, mold protection, dust protection, and heat dissipation in electronic products |
| Weight | 67.2 g |
| Brand | FLYWOO |
| Product type | Drones & Quadcopters > Drone Accessories |
Flywoo X30 is a convenient solution for pilots, engineers, and drone maintenance specialists who aim to increase equipment reliability in high humidity conditions or when operating over the sea. The light weight of the can (67.2 g) and economical material consumption make the spray a cost-effective choice: with careful application in thin, even layers, one can is sufficient for many jobs.
For best results, apply thin and even layers, allow sufficient drying time between applications, and re-treat if necessary. If you need to protect the board and individual components without significantly affecting their functionality, Flywoo X30 PCBA will be the optimal choice.
Additional information: brand — FLYWOO; the product is intended for use in drones and quadcopters as an accessory for electronics protection. 2–3 layers are recommended for reliable superhydrophobic effect; drying time for one layer is 2–3 minutes. Avoid immersing a powered board and use special cleaning solutions before re-application.
Other products in this category here Drone Accessories
No questions about this product, be the first and ask your question.
