The Fenix E01 V2.0 black handheld flashlight from Fenix is an ultracompact pocket flashlight for everyday use and outdoor activities. This model features a Cree XP-G2 S3 LED with a lifespan of up to 50,000 hours, providing reliable and stable light. The flashlight operates on one AAA (LR03) battery, which is included; Ni-MH rechargeable batteries are recommended. Li-ion batteries are not compatible.
| Fenix E01 V2.0 Cree XP-G2 S3 Flashlight | |||
| ANSI | Maximum | Medium | Minimum |
| Brightness | 100 lumens | 25 lumens | 5 lumens |
| Runtime Alkaline batteries | 50 minutes * | 4 hours 50 minutes | 25 hours |
| Runtime Ni-MH rechargeable batteries | 50 minutes* | 4 hours 30 minutes | 23 hours |
| Distance | 35 m | 19 m | 9 m |
| Impact Resistance | 1 m | ||
| Water Resistance | IP68, submersible up to 2 meters | ||
| Dimensions | 67 mm (length) x 14 mm (body diameter) x 15 mm (head diameter) | ||
| Weight | 13 g (without batteries) | ||
| Package Contents | Fenix E01 V2.0 flashlight, AAA battery, key ring, spare O-ring, user manual, warranty card. | ||
| Power Source | AAA batteries | ||
| Body Material | Aircraft-grade aluminum | ||
| Body Finish | Premium Type III hard-anodized anti-abrasive finish | ||
| Activation | Twist switch | ||
Description
The Fenix E01 V2.0 is a member of the EDC lineup, designed for those who always need a compact and reliable light source. Thanks to its small size (67 mm x 14 mm x 15 mm; 6.7 x 1.5 x 1.4 cm) and a weight of only 13 g without batteries, it is ideal as a keychain or key light. The body is made of aircraft-grade aluminum with a premium Type III hard-anodized finish for increased scratch and abrasion resistance.
Light Modes and Battery Life
The flashlight has three modes: Maximum (100 lumens, up to 50 minutes runtime*), Medium (25 lumens, up to 4 hours 50 minutes with alkaline batteries or 4 hours 30 minutes with Ni-MH), and Minimum (5 lumens, up to 25 hours with alkaline batteries or 23 hours with Ni-MH). The maximum illumination distance is up to 35 meters. The total runtime in maximum mode is indicated taking into account overheating protection: when heated, the brightness decreases to cool the body.
Operation
Operation is performed by twisting the head (twist switch), which allows you to turn the flashlight on and off with one hand. To switch modes when the flashlight is on, you need to turn the device off for one second and then turn it back on.
Reliability and Protection
The Fenix E01 V2.0 has an IP68 protection rating (submersible up to 2 meters) and can withstand drops from a height of up to 1 m. This makes it suitable for urban use and outdoor activities. The Cree XP-G2 S3 diode guarantees a long service life of up to 50,000 hours.
Package Contents and Warranty
Included in the package: the Fenix E01 V2.0 flashlight itself, an AAA (LR03) battery, a key ring, a spare O-ring, a user manual, and a warranty card. The official warranty for the model is 5 years.
Recommendations and Warnings
Do not disassemble the head – this will compromise the seal and void the warranty. Use high-quality and approved power sources; do not store the flashlight with batteries for a long time. When replacing batteries, check the condition of the rubber O-rings and replace them if necessary. Do not shine the beam directly into eyes.
Please note: experimental data was obtained using a Pairdeer Alkaline battery (included) and a Ni-MH rechargeable battery with a capacity of up to 750 mAh at a temperature of approximately 21 ± 3 °C and humidity of 50–80%. Parameters may vary depending on usage conditions and battery quality.
Other products in this category here Camping Flashlights
There are no reviews for this product, be the first to leave your review.
No questions about this product, be the first and ask your question.
