Robbery leads to loss of valuables, but fire can destroy property completely. Therefore, we recommend supplementing your security alarm system with Ajax FireProtect Plus smoke and carbon monoxide detectors. This wireless detector is designed to detect fire in a protected area. The detector identifies smoke using an infrared emitter and a photodetector. These elements are mounted in a special smoke chamber. If smoke particles enter the chamber, the photodetector detects distortion of the infrared beam. If the smoke becomes dense, the beam distortion increases, the detector sends wireless fire alarm signals to the Ajax Hub smart control panel, and the siren activates. It features quick and safe installation, reliable sabotage protection, and easy device management and setup. The detector is used to detect smoke in homes, shops, hotels, restaurants, office buildings, schools, banks, libraries, warehouses, etc.

Specifications:

Color: White / Black

Sensor type: Wireless

Usage: Indoors

Sensors: Photoelectric and CO

Temperature sensor: From +54°C to +65°C

Tamper protection: Yes

Notification type: Light and sound

Synchronous alarm for multiple sensors: Yes

Built-in siren volume: 85 dB

Radio signal power: 20 mW

Communication protocol with control panel: Jeweller (868.0-868.6 or 868.7-869.2 MHz depending on sales region)

Max. distance between sensor and control panel: 1300 m (in open space)

Power supply type: 2 CR2 3V batteries

Additional battery: CR2032

Battery life: Up to 4 years

Operating temperature range: From 0°C to +65°C

Permissible humidity: Up to 80%

Dimensions: 132x132x31 mm

Weight: 220 g