AGM Multi-Gel Battery

An external universal battery made using AGM multi-gel technology – a fully sealed external power source that requires no maintenance during storage and operation.

The manufacturing technology for universal external AGM (absorbent glass mat) batteries involves an absorbent fiberglass mat inside the battery. Batteries of this type handle increased loads exceptionally well.

The main feature of SILVER batteries is the use of silver alloying technology. The plates inside the battery are protected from corrosion processes, and the presence of silver significantly improves the gas recombination mechanism. LogicPower SILVER batteries, compared to conventional multi-gel batteries, have an increased battery life and 15% higher starting currents.

Advantages of an AGM Multi-Gel Battery:

• The charge/discharge cycle life of a multi-gel battery is 1300* (on average 6-7 years, depending on operating conditions).
• The battery can be installed in residential premises. The absence of free liquid electrolyte between the plates and the fully sealed casing prevent acid leaks and guarantee no harmful fumes.
• These batteries demonstrate stable results in practical use when operating in low (-20°C) and high (+50°C) ambient temperatures.
• In operation, an AGM multi-gel battery can withstand prolonged discharge, cyclic discharge, deep discharge, and high-current discharge.
• Batteries of this type have low self-discharge rates during long-term storage and reliable self-protection against over-discharge and over-charge.

Features of AGM Multi-Gel Battery Production

Multi-gel batteries are manufactured using advanced AGM technology with thickened plates featuring high anti-corrosion properties.

Porous insulating separators made of thin fiberglass are placed inside the battery. The separators and electrode plates are tightly pressed against each other. Thus, no free liquid electrolyte remains between the battery plates, as it is contained within the separator and the active part of the electrodes.

The amount of liquid electrolyte is metered so that small pores are filled with acid, while larger ones ensure gas circulation.

The design of the multi-gel battery features an improved gas recombination system – oxygen and hydrogen, formed as a result of chemical processes, do not evaporate outside the sealed casing before condensation.

Areas of Application: What is an AGM (Multi-Gel) Battery Used For?

The universal external charging battery is used:

• In telecommunication and other communication systems, including external batteries for charging mobile phones, radios, etc.
• For video surveillance, security, burglar, fire, and other alarm systems equipment.
• In uninterruptible power supply systems for server stations.
• As a power source for medical, laboratory, commercial, and other specialized equipment.
• In energy storage systems from alternative sources (batteries for solar panels).
• As a battery for emergency or LED luminaires.
• As batteries for uninterruptible power supply units and UPS.

Which batteries are suitable for emergency lighting systems in Ukraine, and which battery should I buy for a UPS?

The choice of battery depends on the power of the connected loads, as well as the autonomous operating time of the equipment from the battery.

An external AGM (multi-gel) battery for a UPS must have sufficient capacity reserve, a wide range of operating temperatures, and a long service life.

Before deciding which battery is best to buy for a UPS, carefully study the parameters of the uninterruptible power supply and determine the amount of time required for autonomous operation of electrical equipment from the battery.

Multi-gel batteries are in high demand among consumers who want to buy an inexpensive and universal battery for a heating boiler, emergency lighting systems, or autonomous water supply.

How to avoid battery capacity loss during frequent power outages?

Two important rules for caring for AGM, GEL, MG batteries:

1. Do not frequently discharge the battery by more than 30% of its capacity (consider this when calculating battery capacity)
2. After discharge, the battery must be fully charged with a current of 1/10 of its capacity for 10 hours

IMPORTANT! If a group of several batteries connected in parallel or in series is used, then:

• all batteries must have the same capacity,
• be of the same type (AGM, GEL, or MG),
• have the same voltage, the same number of charge/discharge cycles,
• be from the same batch of the same brand.

On the official LogicPower website, you can order UPS batteries and other types of batteries with delivery across Ukraine. Price – directly from the manufacturer.

Warranty – 24 months.

The company ensures 100% fulfillment of warranty obligations. Technical maintenance and repair of LogicPower equipment are carried out in certified service centers.

*Depending on operating conditions