FireProtect 2 (CO) is a wireless fire detector that detects temperature increases. It is designed for indoor installation and operates as part of the Ajax system. The detector is equipped with a siren for audible notification of alarms and events.

FireProtect 2 is available in two modifications:

• with non-replaceable batteries (has SB in the name) that last 10 years;
• with replaceable batteries (has RB in the name) that last up to 7 years.

The detector operates as part of the Ajax system, communicating with the hub via the secure Jeweller radio protocol. The communication range with the hub in the absence of obstacles is up to 1700 meters.

The detector is always active, so it responds to fire 24/7, regardless of the system's armed mode.

FireProtect 2 is tamper-protected. It monitors the removal of the detector from the SmartBracket mounting panel.

Ajax automation devices can react to a FireProtect 2 alarm and perform user-defined actions using automation scenarios.

Two built-in A1 class thermistors are responsible for detecting a sharp rise and exceeding the temperature threshold in FireProtect 2. They signal an alarm if a rapid temperature increase or a static temperature within +54°C to +65°C is detected.

FireProtect 2 will report exceeding the permissible temperature threshold as soon as its value exceeds +64°C. The detector will report a sharp temperature increase if the reading rises by 10°C within one minute. If the temperature reading sharply increases by 20°C or more, the detector signals immediately.

The Test/Silence button allows you to:

• start a detector performance test;
• silence the detector's alarm or the synchronous alarm of all fire detectors in the system for 10 minutes;
• silence audible and LED indications for 12 hours.

All FireProtect 2 series fire detectors support the synchronous alarm function. This function activates the built-in sirens of all fire detectors in the system as soon as at least one fire detector registers an alarm.

The Ajax system can transmit alarms and events to the PRO Desktop monitoring application, as well as to a central monitoring station (CMS) in SurGard (Contact ID), SIA DC-09 (ADM-CID), ADEMCO 685, and other protocols.

Brief summary:

FireProtect 2 (CO) is a reliable wireless fire detector that will help protect your property from fire. It is easy to install and use, and has a wide range of features, including synchronous alarm and support for automation devices.