Class 1 Ballistic Inserts for Gen.4 Body Armor — Size 550×440 mm

Brand: Specprom. These enlarged ballistic inserts (sometimes called "vests") are designed for use as front and rear chest inserts in IBV-1 body armor and in typical body armor with "ears" (similar solutions are used in US armed forces body armor). The design feature is a very large protection area: the inserts cover almost the entire torso, including the side parts under the armpits.

Dimensions and package contents: the size of the ballistic inserts is 550 by 440 mm, the front and rear inserts are identical. THE PRICE IS FOR A SET, I.E., FOR THE FRONT AND REAR BALLISTIC INSERTS.

Protection class and weight: Class 1 ballistic inserts provide reliable protection against shrapnel, ricochets, and small arms fire — 9×18 mm bullets (Makarov and Luger). The weight of the set (front and rear inserts) is approximately 2.74 kg.

Material: the inserts are based on UHMWPE (ultra-high molecular weight high-density polyethylene), which provides an optimal balance of weight and protective properties. This is important because behind-armor blunt trauma (recoil, internal injuries) can cause serious consequences, and UHMWPE material reduces the risks of such injuries.

Design features: due to the enlarged side parts ("ears") and an extended upper part, the inserts cover almost the entire torso area and effectively protect against the most common shrapnel injuries. Such inserts are the basis of the IBV-1 body armor and its American counterpart, the OTV. By wearing such body armor, you get basic protection against shrapnel and ricochets with a relatively low weight of the complex; if necessary, hard armor plates of 25×30 cm or 27×35 cm can be inserted inside (special pockets are provided for them), and the body armor acquires full protection against sniper and small arms bullets.

Who these inserts are suitable for

Suitable for both military and civilians who need maximum torso coverage from shrapnel and injuries with weight limitations. Large side "ears" provide additional overlap on the sides of the body, which is especially important for blast trauma and shrapnel injuries.

Documentation and testing

All declared protection classes are confirmed by laboratory tests. We will send copies of the relevant documents along with the ballistic inserts for your review. A testing video is also available: View ballistic protection test (video).

Technical specifications

• Brand: Specprom
• Product type: Military equipment > Soft ballistic protection > Class 1 protection
• Protection class: Class 1 (protection against shrapnel, ricochets, 9×18 mm shots)
• Size: 550 × 440 mm (front and rear inserts)
• Set weight: approximately 2.74 kg (front + rear)
• Material: UHMWPE (ultra-high molecular weight high-density polyethylene)
• Compatibility: IBV-1, OTV body armor and other vests with "ears"; pocket for hard armor plates 25×30 cm or 27×35 cm is provided
• Package contents: front and rear ballistic inserts (price is for a set)

Specprom ballistic inserts are a solution for those who value maximum coverage and balanced weight. They are designed for reliable protection against shrapnel and small arms, as well as a modular base for enhancing protection by adding armor plates. We guarantee quality and provide test documents for your confidence.

Other products in this category here Class 1 protection