PAWELL Solid-State 66,000 mAh UAV Battery
PAWELL Solid-State 66,000 mAh — a battery model designed for long and resource-intensive missions. It is oriented towards large UAVs and long-range drones where autonomy, power stability, and weight-to-efficiency ratio are critical. Solid-State technology with an energy density of ~290 Wh·h/kg ensures stable operation and an increased level of safety compared to classic Li-ion or LiPo batteries. Support for 198 A continuous and 330 A peak current allows the battery to be used on heavy hexa- and octocopters.
Key Advantages
- High energy efficiency — 1504 Wh·h at a weight of 5.8 kg (~290 Wh·h/kg), ~25% lighter than Li-ion/LiPo analogs of the same capacity
- High load operation — 198 A continuous current and up to 330 A peak (5C)
- Low-temperature resistance — stable operation from −20°C to +65°C
- Fast preparation for re-flight — charging up to 25 A / 4.45 V
- Increased flight duration or payload without exceeding mass limits
- Compatibility with 6S platforms (22.8 V) — Vampire, Matrice 600, hexa- and octocopters, agricultural drones, custom 6S builds, and large-span wings
Areas of Application
- Large bomber drones and long-range UAVs
- Agricultural drones and cargo platforms
- Hexa- and octocopters, large-span wings
Technical Specifications
| Parameter | Value |
| Model | PAWELL Solid-State 66,000 mAh |
| Configuration | 6S1P |
| Cells | Solid-State |
| Nominal Voltage | 22.8 V |
| Capacity | 66 Ah (1504 Wh·h) |
| Voltage Range | 18–26.7 V |
| Peak Discharge Current | 330 A (5C) |
| Dimensions | 65 × 165 × 255 mm |
| Weight | 5.8 kg |
| Charging | up to 25 A / 4.45 V |
| Power Cable | AWG6 |
| Power Connector | QS-8s |
| Operating Temperature | −20°C … +65°C |
PAWELL Solid-State 66,000 mAh Battery for UAVs — a tactical solution for field conditions.
Other products in this category here Drone Batteries
There are no reviews for this product, be the first to leave your review.
No questions about this product, be the first and ask your question.
