The RadioMaster GX12 radio control system combines innovative ExpressLRS and EdgeTX technologies to ensure stable communication and advanced control capabilities. Thanks to dual-band transmitters at 2.4GHz and 900MHz, the system provides a wide range and reliable signal. Foldable antennas and sticks facilitate transportation and storage of the device. Digital gimbals with a 1000Hz frequency guarantee smooth and precise control. The OLED display provides clear information, and the internal 512Mb memory allows operation without additional memory cards. The system supports individual customization thanks to interchangeable switch panels and programmable buttons. The robust housing and circuit board protection allow the equipment to be used in all weather conditions.

Note: do not turn on the radio equipment without an antenna connected!

Video review of RadioMaster GX12 Dual-Band 2.4GHz/900MHz 16CH Radio Control System

Features

• Dual ExpressLRS Gemini-XROSSBAND dual-band transmitter provides simultaneous operation at 2.4GHz and 900MHz frequencies with power up to 1W
• Built-in foldable antennas support 2.4GHz and Sub-G 900MHz frequencies, facilitating transportation and storage
• GX01 Gimbals are equipped with CNC digital 3D Holla sensors for accuracy and reliability
• Digital gimbals with EdgeTX synchronization operate at 1000Hz for maximum sensitivity
• Removable switch panels allow individual control customization according to user needs
• Built-in 512Mb memory
• PCB coating protects the equipment even in harsh operating conditions, including extreme temperatures and humidity

Specifications

• Frequency: 2.400GHz/Sub-G 900MHz
• Number of channels: up to 16 (depending on receiver)
• Internal RF chip: ELRS 2.4GHz/ Sub-G 900MHz
• Protocol support: Express-LRS
• Antennas: 2.4GHz/Sub-G 900MHz omnidirectional
• RF: dual 1000mW/dual-band XROSSBAND ELRS
• Firmware: EdgeTX (transmitter)/ELRS (RF module)
• Display: 128*64 monochrome OLED display
• Operating current: 390mA-1000mA (depending on RF output)
• Voltage range: 6.6-8.4V DC
• Gimbal: GX01 1000Hz, 3D Digital CNC Hall Effect Gimbal with foldable sticks
• External module: Nano/Crossfire compatible
• Update method: USB/EdgeTX Companion PC software
• Memory: built-in 512Mb flash memory
• Charging: 2S Smart Balance Charging
• Recommended battery: 2-cell 7.4V lithium polymer/two 3.7V 18650 lithium-ion cells/21700 5000mAh battery (not included)
• Connection: USB-C
• Cooling fan: yes
• Color: black
• Gimbal stick length: 3mm
• Size: 183*148*78mm
• Weight: 573g

Package Contents

• 1 x RadioMaster GX12 radio control system
• 1 x branded bag
• 1 x 18650 battery tray
• 2 x interchangeable switch panels
• 1 x Type-C cable
• 1 x screen protector
• 1 x 1.5mm hex key
• 4 x low-tension gimbal springs
• 1 x 2-position switch
• 1 x momentary switch
• 1 x RadioMaster sticker set
• 1 x user manual

Attention! Batteries are not included!

Controllers for FPV and quadcopters , ELRS 2.4 GHz drone controllers, ELRS 915 MHz drone controllers, Drone controllers with a monochrome OLED display, Drone controllers with 18650×2 Li-Ion batteries, Drone controllers with 2 × 21700 Li-Ion batteries, Drone controllers with 2S LiPo batteries