CPR Face Shield with Valve (Rescue Ready) — Disposable Protective Device for Artificial Respiration

The CPR face shield with valve from Rescue Ready is a disposable Type B device (valve with film) designed for artificial ventilation during cardiopulmonary resuscitation. The device allows for mouth-to-mouth artificial respiration while reducing the risk of direct contact between the rescuer and the victim thanks to the protective film. It is recommended for use in cases of altered consciousness, presence of breathing and carotid pulse in the victim, when additional lung ventilation is required.

Key advantages of the face shield with valve:

• Reliable barrier between rescuer and victim, reducing the risk of infection transmission;
• Compact and single-use for quick and hygienic intervention;
• Simple design with valve and film, allowing for rapid deployment and application in field conditions.

Device usage instructions:

• 1. Safety check: ensure the packaging is undamaged and the factory seal (print) is intact.
• 2. Unpacking: open the packaging carefully, without disturbing the device's structure.
• 3. Preparation for use: ensure there are no safety threats to you or the victim; ensure the victim is lying on a flat, firm surface.
• 4. Usage: remove the device from the packaging; unfold the face mask; insert the valve into the victim's mouth with the larger side towards the victim, ensuring a tight seal; spread the face mask over the victim's face, covering the nose and mouth; take a deep breath and exhale through the mask, doing so carefully and evenly; during exhalation, observe that the victim's chest rises; continue artificial respiration approximately once every 5 seconds.
• 5. Continuous monitoring: carefully observe the victim's condition, listen for breathing sounds, and check the pulse.
• 6. Duration of assistance: if necessary, continue artificial respiration until qualified medical help arrives or spontaneous breathing resumes.
• 7. After use: remove the mask from the victim's face; dispose of the used device according to local medical waste regulations.

The CPR face shield with valve from Rescue Ready is a simple and effective solution for tactical medicine and field first aid, easily fitting into a first-aid kit and allowing rescuers to quickly restore lung ventilation without direct mouth-to-mouth contact. The device is specifically designed for single use, making it hygienically safe and convenient for emergency situations.

Recommendations: always follow first aid training, manufacturer's instructions, and local protocols; in complex cases, combine artificial respiration with other cardiopulmonary resuscitation measures according to guidelines.

Product type: Tactical Medicine > First Aid Supplies > Pneumothorax Treatment. Manufacturer: Rescue Ready. Name: CPR Face Shield with Valve.

Please note: the device is intended for single use only; do not reuse.

Other products in this category here Pneumothorax Treatment