Xgecu T48 (TL866 3G) is a new generation of the popular universal chip programmer, which, according to the manufacturer, is a fundamentally new device.
The programmer operates under the control of a 32-bit processor with a clock frequency of 120 MHz. In conjunction with a high-speed USB bridge, it provides significantly increased operating speed, allowing this programmer to be used for working with large volumes of various memory chips. The number of programming ports, and the number of supported chips and microcontrollers have been increased. The device is capable of checking the operability of memory chips, and a reliable protection system will save the programmer in case of incorrect chip installation.

Number of supported chips: over 31,000
Number of programmable ports: 56
64 levels of operating voltage adjustment from 1.8 to 6.5 V
64 levels of programming voltage from 9 to 25 V
Adjustable power circuit protection from 120 to 320 mA
Supported memory types: eMMC (up to 256 GB), NAND (up to 256 GB), NOR, CPLD, CMOS, ROM
Support for programming Atmel and Microchip microcontrollers in high-voltage mode
Works with 8051 series MCUs from various manufacturers
Power supply: from USB port 5 V 0.5 A (it is strongly recommended to use a USB port and USB cable that are guaranteed not to have current drops)
Housing material: plastic
Programmer dimensions: 10 x 6.5 x 4 cm
Kit weight:

The kit includes:

Xgecu T48 (TL866 3G) programmer
USB cable
SOP28-DIP28 OTS-28-1.27-04 programming adapter
SOP8-DIP8 OTS-16-03 (150mil) programming adapter
SOP8-DIP8 OTS-20-1.27-01 (200-209mil) programming adapter
PLCC44-DIP40 chip adapter
PLCC32-DIP32 chip adapter
PLCC28-DIP24 chip adapter
PLCC20-DIP20 chip adapter
1.8 V DIP8 SPI adapter
SOP16 (1.27 mm) – SSOP16 (0.65 mm) adapter
SOP16/8-DIP8 adapter
SOP8 clip for in-circuit chip programming with SOP16/8-DIP8 adapter
PLCC, integrated circuit, chip extractor (tweezers)