Meteor65 Pro ELRS (2022) Quadcopter – FPV Drone for Training from BetaFPV is a compact and lightweight 1S brushless whoop, designed for FPV beginners and enthusiasts who want to train indoors and outdoors. This drone combines maneuverability, propeller protection, and modern components, making it an excellent choice for first flights and mastering acrobatics.

Description and Key Features

The Meteor65 Pro (2022) features an updated canopy design that reduces thermal interference, and it supports the ExpressLRS 2.4G receiver for extended range and communication stability. It includes a built-in C03 FPV micro camera for high-quality real-time video transmission. The protective frame with canopy ensures safety during training flights and contact with obstacles.

Advantages of Meteor65 Pro

• Support for batteries with BT2.0 connector, which reduces internal resistance and allows for increased actual flight time;
• The F4 1S 5A FC stack provides upgrade capabilities and supports updates to ELRS V3.0 (separately);
• New 0802SE 19500KV motors paired with 35mm three-blade propellers provide high thrust and control sensitivity;
• The built-in C03 FPV camera, weighing 1.45g, ensures a clear image during flight;
• A lightweight camera canopy (1.60g) and protective frame safeguard the equipment during landings and collisions.

BT2.0 Connector

The BT2.0 connector reduces internal resistance, allowing it to transmit up to 9A continuous current and up to 15A peak. This ensures more efficient power distribution and increased actual flight time when using recommended batteries.

Flight Controller and ESC

All BNF versions of Meteor65 Pro are equipped with the F4 1S 5A FC controller. For ELRS versions, Serial ELRS 2.4G is used instead of SPI, which improves compatibility and communication stability. The ESC is built on BB51 hardware and runs Bluejay 96k firmware, allowing for better utilization of motor potential compared to previous models.

C03 Camera

The C03 FPV Micro Camera weighs only 1.45g, has a resolution of 1200TVL, a 1/3" CMOS sensor, a 2.1mm lens with a 160° field of view (FOV), and low latency, providing a clear and high-quality real-time image during flight.

0802SE Motors

The 0802SE 19500KV motor is a lightweight 1S motor, weighing 1.88g each, which provides high power and thrust with minimal weight. The optimal dynamic balance of the motors enhances maneuverability and stability during trick execution.

Technical Specifications

• Model: Meteor65 Pro 1S Brushless Whoop (2022)
• Weight: 23.01g (without battery)
• Motor Wheelbase: 65mm
• Frame: Meteor65 Pro 65mm 1S Brushless Frame
• Propellers: 35mm 3-blade props (1.0mm Shaft)
• Motors: 0802SE Brushless Motor
• Camera Canopy: Canopy for Micro Camera (weight 1.60g)
• FC&ESC: F4 1S 5A FC
• Receiver: ELRS 2.4G (ExpressLRS)
• Camera: C03 FPV Camera (1200TVL, CMOS 1/3", 2.1mm, 160° FOV)
• Camera Tilt: 30°
• VTX: M03 25-350mW VTX
• Batteries: BT2.0 300mAh 1S 75C Battery
• Flight Time: ~4.5 min

Meteor65 Drone Package Contents

• 1 x Meteor65 Pro Quadcopter
• 2 x BT2.0 300mAh 1S 75C Battery
• 1 x BT2.0 Battery Charger and Voltage Tester
• 1 x Type-C Cable
• 1 x Carrying Bag, specially designed for this model
• 1 x Spare 35mm 3-blade Propellers (1.0mm Shaft)
• 1 x Screwdriver
• 3 x Decorative Elements
• 1 x 20° Bracket for C03 Camera
• 1 x 30° Bracket for C02 Camera
• 1 x Screw Set

This drone is ideal for those who value compactness, safety, and quick learning in the FPV world. The Meteor65 Pro combines modern components – the C03 camera, powerful 0802SE motors, reliable FC/ESC hardware, and ELRS support – so you can confidently begin your first flights and develop skills in both simple flights and acrobatics in confined spaces. Brand: BetaFPV. Category: Drones & Quadcopters > Drones for Beginners.

Other products in this category here Drones for Beginners