Cetus Pro FPV Quadcopter – FPV Drone for Training from BetaFPV is a ready-to-fly kit for those taking their first steps in the world of FPV or wishing to improve their skills in a safe environment. This brushless whoop quadcopter combines high maneuverability, a robust protected design, and a set of features that make it suitable for indoor and outdoor flights. Product category: Drones & Quadcopters > Drones for Beginners.

Key Advantages and Features

• The auxiliary flight function significantly lowers the control threshold and allows for faster mastery of FPV piloting.
• Brushless motors provide greater power and maneuverability for performing acrobatic elements and training.
• The emergency landing function automatically activates upon loss of control or low battery to reduce the risk of damage.
• The PA12 frame with 360° protection increases impact resistance and safety for indoor and outdoor flights.
• The kit comes with a portable EVA bag for convenient transport and equipment protection.

Altitude Hold and Positioning

Cetus Pro supports altitude hold thanks to a barometer and laser, ensuring precise and stable positioning even without pilot intervention; this function is available in N mode. Positioning system: optical flow / barometer / laser; altitude positioning: laser / barometer; position location — optical flow with an effective height of 0.3-3 m. Automatic hover accuracy: horizontal ±0.2 m, vertical ±0.3 m (in the absence of wind).

Safety and Flight Recovery

In case of loss of control, low battery, or a severe collision, the device will perform an emergency landing or shut down and descend to the ground, significantly reducing the risk of damage and loss. Turtle mode allows, with the LiteRadio2 SE transmitter, to flip the quadcopter back over without physically approaching it; please note that the mode may not work if something is blocking the shaft or propellers, in which case you must immediately exit the mode using the SD switch on the transmitter.

Flight Modes

Three modes N / S / M are available for a gradual transition from assisted control to modes for experienced pilots. Mode switching is done via the SB switch on the transmitter. Each mode supports three speeds SLOW / MID / FAST, which are changed by the SC switch, allowing flight dynamics to be adjusted to the pilot's skill level.

Technical Specifications

• Flight controller: Lite 1-2S Pro brushless flight controller with 12A ESC.
• Motor: 1102-18000KV brushless motor.
• Propellers: 40 mm 3-blade, 1.5 mm shaft hole.
• VTX: 25 mW.
• Camera tilt angle: 30°.
• Camera: C02 FPV micro camera.
• Receiver protocol: Frsky D8.
• Takeoff weight: 33.19 g (without battery).
• Power system: 1S.
• Battery: BT2.0 450 mAh 1S (external).
• Flight time: 4-5 min.
• Flight range: up to 80 m in unobstructed space.
• Position location (optical flow) effective at a height of 0.3-3 m.

Additional Features

The LiteRadio2 SE transmitter can be used as a USB joystick for FPV simulators (e.g., EREADRONE, LIFTOFF), allowing training on the ground without risk to the actual drone. The kit combines modern positioning technologies, brushless components, and a well-thought-out set of accessories for a quick start.

Included in the kit

• 1× Cetus Pro brushless quadcopter.
• 2× BT2.0 450 mAh 1S LiPo battery.
• 1× BT2.0 battery charger and voltmeter.
• 1× propeller removal tool.
• 4× 40 mm 3-blade propellers.
• 2× user manual.
• 1× screwdriver.

BetaFPV Cetus Pro is a reliable, protected, and easy-to-learn FPV drone, suitable for both beginners and those wishing to hone their piloting skills. All listed technical parameters and characteristics are taken into account for convenient selection and preparation for flights.

Other products in this category here Drones for Beginners