Steadyview X is an updated version of the SteadyView receiver from the SKYZONE brand for SKY04/EV300O/COBRA/Fatshark glasses. This receiver combines two signals from the antennas into one, prevents image breaks, making it more stable even in difficult flight conditions. It is equipped with a color IPS screen and a scroll wheel for more convenient use. The SteadyView X receiver has a ground station kit, so the user can mount it on any monitor or glasses with an AV IN port. In addition, SteadView X already has a built-in ELRS backpack, which will allow using a Lua script to synchronize the transmitter with the receiver.

Features

• Highly sensitive: -98 dBm ± 1 dBm
• IPS screen
• Wheel control
• Ground station set
• USB C port for firmware update support or powering on the receiver
• ELRS
• The Steadyview X 5G version supports band X, also works with 5.8G, but the sensitivity may be 1-2 dB lower,
  however, the standard 5.8G module does not support 5G (band X)

Characteristics

• Display: 0.96 inch, color LCD
• Frequency:
  • 5.8 (5.3-6GHz)
  • 5 GHz
• Channels: 48
• Sensitivity: -98dBm±1dBm
• Narrow-Band Filter: Yes
• Connectors: 2x Standard SMA-K, 50 Ohm
• Modes: Mix1, Mix2, Mix3, Diversity, Single RX
• Video output: 1.0Vp-p Typ. / 75 Ohm
• Audio output: No
• Question:
  • voltage 6.5-26V,
  • consumption: 12V input *240mA Normal, 180mA Single RX
• Interface:
  • DC input: 5.5mm *2.1mm
  • A/V output: 3.5 mm
  • USB: Type-C, firmware update
• Dimensions: 65x32x32mm
• Weight: 49g

Complement

• 1x Steadyview X receiver module
• 1x Module compartment cover SKY04/EV300O/COBRA/Fatshark
• 1x Set of ground station
• 1x Power cable with XT60-Barrel connector
• 1x 3.5 mm video output cable
• 1x RHCP patch
• 1x 1 omi antenna

Files

• Custom frequency firmware creation manual - Instructions for custom firmware