GNB 380mAh 3.8V 1S 60C LiPo HV PH2.0 Battery – Battery for 1S Drones

The lightweight and compact GAONENG GNB 380mAh 3.8V 1S 60C LiHV battery with a factory PH2.0 connector is specifically designed for miniature FPV drones (Tinywhoop) and other 1S platforms. The nominal voltage of 3.8V (LiHV), combined with the ability to charge up to 4.35V, allows for increased capacity and longer flight times compared to standard 1S batteries. With a continuous discharge current of 60C and a pulse peak current of up to 120C, this battery provides rapid power delivery during sharp accelerations and stable motor operation under load.

Key Advantages

• Power and Stability: 60C continuous discharge, 120C peak pulse — for agile flights and aggressive control.
• Compact Form Factor: Elongated design facilitates installation in 1S Tinywhoop frames and similar chassis.
• Compatible Connector: PH2.0 connector with wire ensures easy connection to most modern boards for 1S systems.
• LiHV Technology: Allows charging up to 4.35V for maximum capacity and extended flight time.
• Manufacturer: GAONENG (Gaoneng) — a renowned brand in the FPV battery segment.

Technical Specifications

• Model: GNB 380mAh 1S 60C LiHV battery with wire
• Capacity: 380mAh
• Nominal Voltage: 3.8V (1S LiHV)
• Maximum Charging Voltage: 4.35V
• Discharge Rating: 60C continuous, 120C pulse (peak)
• Connector Type: PH2.0 connector with wire
• Weight: approximately 8 g (+/-5%)
• Dimensions: approximately 7 x 11 x 62 mm (without wires and connectors)
• Purpose: For 1S miniature drones, Tinywhoop, and compatible platforms
• Manufacturer / Brand: GAONENG (Gaoneng)
• Category: Drones & Quadcopters > Drone Batteries

Recommendations and Safety Precautions

• Before first use, fully charge the battery using a compatible charger.
• Use only compatible chargers for LiPo / LiHV batteries; do not leave the battery unattended during charging.
• Avoid contact with flammable materials during charging or operation.
• Do not overcharge: the maximum permissible voltage for LiHV is 4.35V; standard LiPo is 4.2V.
• Do not discharge below 3.0V per cell under load to avoid cell damage.
• Proper storage: do not store fully charged batteries for more than three days; for long-term storage, maintain a voltage of approximately 3.8–3.9V (storage function on the charger).
• Safety: do not disassemble, deform, short-circuit, or expose the battery to open flame or strong heat.
• Do not use batteries with visible signs of swelling, deformation, or insulation damage.

The GNB 380mAh 3.8V 1S 60C LiHV PH2.0 battery is a practical choice for pilots seeking a combination of low weight, high output, and the ability to gain additional capacity thanks to LiHV technology. Before installation, check the compatibility of the PH2.0 connector with your board or connectors and follow the operating rules provided to ensure a long battery life.

Other products in this category can be found here Drone Batteries