Quadcopter Mobula8 2S ELRS 2.4GHz – FPV Drone for Indoor or Outdoor Training
Happymodel Mobula8 (UART ELRS 2.4G version) — a compact mini-FPV whoop designed for beginners and those seeking a reliable drone for indoor and outdoor flights. This micro-drone combines a protected carbon frame, well-designed electronics, and powerful EX1103 KV11000 brushless motors with a 1.5mm shaft, which, together with Gemfan Hurricane 2023 tri-blade propellers (52.17mm diameter), provides high thrust, rapid acceleration, and confident control during maneuvering. Brand: Happymodel. Product category: Drones & Quadcopters > Drones for Beginners.
Electronics and Cameras
Flight controller: X12 ELRS AIO with a sensitive ICM42688P (SPI) gyroscope ensures flight stability. The board includes a powerful STM32F411CEU6 (100 MHz, 512K Flash) MCU and an ESP32-PICO-D4 module, providing instant response to controls. Video transmitter: Onboard 5.8G OpenVTX 0~400 mW with OPENVTX firmware allows for high-quality image transmission to goggles. FPV camera: Caddx FPV Ant with a 1/3″ CMOS sensor and 1200 TVL horizontal resolution guarantees a clear real-time picture.
Packet rate modes: 50Hz/150Hz/250Hz/500Hz. ExpressLRS version: V3.0 (upgradable via Wi-Fi). RF control frequency: 2.4 GHz. Antenna: SMD. Thanks to OpenVTX and ExpressLRS, the user can update firmware and flexibly configure settings to their needs.
Technical Specifications
| Brand | Happymodel |
|---|---|
| Product Name | Mobula8 1-2S 85mm Micro FPV whoop |
| Wheelbase | 85 mm |
| Flight Controller | X12 ELRS AIO |
| MCU | STM32F411CEU6 (100MHZ, 512K Flash), ESP32-PICO-D4 |
| VTX | Onboard 5.8G OpenVTX 0~400 mW |
| Gyroscope | ICM42688P (SPI) |
| Motor Model | EX1103 KV11000 |
| Propellers | Gemfan Hurricane 2023 tri-blade, 52.17 mm diameter |
| Size | 120x120x50 mm |
| Packet Rates | 50Hz/150Hz/250Hz/500Hz |
| ELRS Firmware Version | V3.0 (upgradable via Wi-Fi) |
| RF Frequency | 2.4 GHz |
| Antenna | SMD antenna |
| Camera | Caddx ANT |
| Horizontal Resolution | 1200 TVL |
| Image Sensor | 1/3″ CMOS Sensor |
| VTX Firmware Version | OPENVTX |
| Weight | 43 g |
| Motor Type | Brushless |
| Recommended Batteries | 2S 450-650 mAh LiPo / LiPo HV (not included) |
Key Advantages of Mobula8
- Powerful EX1103 KV11000 motors provide high thrust and rapid acceleration for performing tricks and confident handling.
- Caddx FPV Ant camera with 1/3″ CMOS delivers a clear real-time image to goggles for both indoor and outdoor flying.
- ExpressLRS 2.4G protocol with low latency and stable connection guarantees precise and reliable control.
- Compact dimensions (120x120x50 mm), a weight of only 43 g, and an 85 mm wheelbase make the Mobula8 convenient for transport and training.
Package Contents
- 1 x Happymodel Mobula8 1-2S 85mm FPV Whoop Drone
- 1 x Gemfan Hurricane 2023 Tri-blade Propellers (2 CW + 2 CCW)
- 1 x Additional 14x14 mm Camera Canopy
- 1 x 5D OSD menu board
- 1 x Screwdriver
The Mobula8 — an excellent choice for FPV beginners and experienced pilots looking for a compact, fast, and reliable micro-drone for fun and training. Recommended batteries: 2S 450 mAh, 2S 550 mAh, or 2S 650 mAh (not included). Devices are compatible with firmware updates via Wi-Fi and allow VTX and radio communication to be configured using ExpressLRS.
For additional technical questions or accessory compatibility, please contact the seller or refer to the official Happymodel documentation.
Other products in this category here Drones for Beginners
There are no reviews for this product, be the first to leave your review.
No questions about this product, be the first and ask your question.